2gig 2GIG-CP21-345E Security and Home Automation Control Panel

2GIG Technologies 2GIG-CP21-345E - 48 wireless Zones. Built-in z-wave rf protocol - customers can now control lighting, HVAC, web-enabled phone, and other Z-Wave appliances in the home right from the panel, or the internet. No more concern with cut phone lines or the elimination of residential phone lines altogether. Built-in z-Wave RF Protocol.

24-hour Backup Battery. Supports gsm radio sold separately - The most reliable communication option available in the industry. Integrated two-way voice - Go!Control allows the central station to listen in and talk to the homeowner when a signal is received. Color touch screen interface - intuitive, user-friendly interface is found on the Go!Control panel, your computer internet and web-enabled phone - providing your customers with access when and where they need it.

2gig 2GIG-CP21-345E Security and Home Automation Control Panel - A dc power receptacle has been added to the Go!Control panel. Snap-in gsm Radio Sold Separately. The new plug-in power receptacle provides a fast and easy alternative to wiring power into the terminal strip addressing some state's requirements. No need for extra hardware-it's all contained within the Go!Control panel.

Color touch Screen Interface. And this is just the beginning! Numerous money- and time-saving applications are currently being developed for 2gig's Go!Control system.

More information about 2GIG Technologies 2GIG-CP21-345E

2gig DW10 Thin Door Window Contact ETL Listed

2gig 1238228 - Equipped with cover tamper for additional security. For use with the 2GIG Alarm System. The sensor has an external input that accepts N/C dry contact devices. Has an external input that accepts N/C dry contact devices. The sensor is also equipped with cover tamper for additional security. The sensor transmits signals to the control panel when a magnet mounted near the sensor is moved away from or closer to the sensor.

Can be installed on doors windows and many other objects that open and close. For narrow application sensor on. 75" wide fully supervised rare earth MagnetSupports Internal and External 345 MHz ETL Listed. This contact is meant for use with the 2GIG Alarm System and can be installed on doors windows and many other objects that open and close.

More information about 2gig 1238228


Similar products



2GIG Verizon 4G LTE Alarm.com Cell Radio Module for GC2 Panels

2GIG-LTEV-A-GC2 - Equipped with cover tamper for additional security. 2gig technologies 2gig-ltev-a-gc2 2gig gc2 4g lte radio adc-VRZN For narrow application sensor on. 75" wide fully supervised rare earth MagnetSupports Internal and External 345 MHz ETL Listed. For use with the 2GIG Alarm System. Can be installed on doors windows and many other objects that open and close.

2gig technologies 2gig-LTEV-A-GC2. Has an external input that accepts N/C dry contact devices.

More information about 2GIG-LTEV-A-GC2


Similar products



2GIG Technologies 2GIG-KEY2-345 Key Ring Remote, 4-Button

NORTEK SECURITY & CONTROL LLC 2GIG-KEY2-345 - Has an external input that accepts N/C dry contact devices. Equipped with cover tamper for additional security. 4-button Key Ring Remote. 2gig. Can be installed on doors windows and many other objects that open and close. Home Security. For use with the 2GIG Alarm System. 2gig technologies 2gig-LTEV-A-GC2. 4-button key ring remote for narrow application sensor on.

75" wide fully supervised rare earth MagnetSupports Internal and External 345 MHz ETL Listed.

More information about NORTEK SECURITY & CONTROL LLC 2GIG-KEY2-345


Similar products



2gig XCVR2 900MHz Transceiver for TS1 White

2gig XCVR2 - The transceiver is a dual frequency device. Has an external input that accepts N/C dry contact devices. 2gig technologies 2gig-LTEV-A-GC2. 2gig. The 2gig-xcvr2 transceiver module is designed to be used with the 2GIG Go!Control Security System control panel. It receives 345 mhz signals from the system sensors, and receives and transmits 900 MHz signals to and from the 2GIG-TS1 Wireless Keypad.

Equipped with cover tamper for additional security. Can be installed on doors windows and many other objects that open and close. The transceiver is a dual frequency device. The 2gig-xcvr2 transceiver module is designed to be used with the 2GIG Go!Control Security System control panel. It receives 345 mhz signals from the system sensors, and receives and transmits 900 MHz signals to and from the 2GIG-TS1 Wireless Keypad.

2gig XCVR2 900MHz Transceiver for TS1 White - For narrow application sensor on. 75" wide fully supervised rare earth MagnetSupports Internal and External 345 MHz ETL Listed. Home Security. For use with the 2GIG Alarm System. Designed to be used with the 2gig security system control panel. The transceiver is a dual frequency device^ it receives 345 mhz signals from the system sensors^ and receives and transmits 900 mhz signals to and from the model 2gig-ts1 wireless keypad^To use a model 2gig-ts1 wireless keypad with the 2gig security system control panel^ The 2gig-xcvr2 tranceiver module must be installed into the control panel.

More information about 2gig XCVR2


Similar products



2gig & Vivint Compatible Door or Window Sensor

Smart Home Direct DW10-2 - The dw10-2 is a surface mounted door/Window Contact that can be installed on doors, windows, and many other objects that open and close. 4-button Key Ring Remote. The sensor has an external input that accepts N/C dry contact devices. Equipped with cover tamper for additional security. 2gig. Has an external input that accepts N/C dry contact devices.

The sensor is also equipped with a cover tamper for additional security. Can be installed on doors windows and many other objects that open and close. This sensor comes with an adjustable magnet that can be used for custom sized doors/windows. Wireless door or window sensor for use with 2gig or Vivint control panels 345MHz.

2gig & Vivint Compatible Door or Window Sensor - The 2gig-xcvr2 transceiver module is designed to be used with the 2GIG Go!Control Security System control panel. Home Security. The sensor transmits signals to 2gig control panels when a magnet mounted near the sensor is moved away from or closer to the sensor. For narrow application sensor on. 75" wide fully supervised rare earth MagnetSupports Internal and External 345 MHz ETL Listed.

. 2gig technologies 2gig-LTEV-A-GC2.

More information about Smart Home Direct DW10-2


Similar products



2gig TAKE Switch Wireless Takeover Module

2gig TAKE - For use with the 2GIG Alarm System. Easily connects to existing control panel's battery. Provides power backup through existing hardwire panel. 8-channel transmitter converts up to 8 hardware loops into 8 wireless sensor Zones 9-16 VDC 50 mA Can be Powered by Third Party Control Panel 345 MHz ETL Listed For narrow application sensor on.

75" wide fully supervised rare earth MagnetSupports Internal and External 345 MHz ETL Listed. The 2gig-xcvr2 transceiver module is designed to be used with the 2GIG Go!Control Security System control panel. Wireless door or window sensor for use with 2gig or Vivint control panels 345MHz. Converts 8 zones per module additional modules may be added.

2gig TAKE Switch Wireless Takeover Module - Designed to be used with the 2gig security system control panel. The transceiver is a dual frequency device^ it receives 345 mhz signals from the system sensors^ and receives and transmits 900 mhz signals to and from the model 2gig-ts1 wireless keypad^To use a model 2gig-ts1 wireless keypad with the 2gig security system control panel^ The 2gig-xcvr2 tranceiver module must be installed into the control panel.

Control panel must be running firmware version 1. 8 or greater to function with this transceiver. High quality and nearly identical to 2gig's DW10 Can be installed on doors windows and many other objects that open and close.

More information about 2gig TAKE


Similar products



HONEYWELL Intrusion 5800PIR-RES WIRLESS PIR, Residential

Honeywell 5800PIR-RES - Range 35 x 40 11 m x 12 m pattern. 80 lbs 36 kg of animal immunity. 4-button Key Ring Remote. Provides power backup through existing hardwire panel. It receives 345 mhz signals from the system sensors, and receives and transmits 900 MHz signals to and from the 2GIG-TS1 Wireless Keypad. Converts 8 zones per module additional modules may be added.

Pcb does not need to be removed to install on wall. 2gig technologies 2gig-LTEV-A-GC2. For use with the 2GIG Alarm System. Comes with an adjustable magnet that has the additional feature of compatibility for custom sized doors/windows. Equipped with cover tamper for additional security. Home Security. Has an external input that accepts N/C dry contact devices.

HONEYWELL Intrusion 5800PIR-RES WIRLESS PIR, Residential - A high performance, easy to install passive infrared sensor with a compact design For narrow application sensor on. 75" wide fully supervised rare earth MagnetSupports Internal and External 345 MHz ETL Listed. Easily connects to existing control panel's battery. Equipped with cover tamper for additional security.

The 2gig-xcvr2 transceiver module is designed to be used with the 2GIG Go!Control Security System control panel.

More information about Honeywell 5800PIR-RES


Similar products



2gig GCCDMV CDMA Cell Radio Module White

2gig GCCDMV - Broad service area coverage. Includes ANT3X antenna. 2gig technologies 2gig-LTEV-A-GC2. Provides 2-way voice communications^must have 1. 9. 4 or higher firmware ota Updates^CDMA cellular technology^Broad service area coverage. High quality and nearly identical to 2gig's DW10 Home Security. Comes with an adjustable magnet that has the additional feature of compatibility for custom sized doors/windows.

Equipped with cover tamper for additional security. Z-wave provides 2-way voice communications Works on Verizon Plus into CNTRL2 Panel Must Have 1. 9. 4 or higher firmware OTA Updates For narrow application sensor on. 75" wide fully supervised rare earth MagnetSupports Internal and External 345 MHz ETL Listed.

2gig GCCDMV CDMA Cell Radio Module White - Pcb does not need to be removed to install on wall. The transceiver is a dual frequency device. Converts 8 zones per module additional modules may be added. Can be installed on doors windows and many other objects that open and close. For use with the 2GIG Alarm System. Provides power backup through existing hardwire panel.

More information about 2gig GCCDMV


Similar products



2gig DW20R Recessed Door Contact ETL Listed

2gig 2GIG-DW20R - Easily connects to existing control panel's battery. Pcb does not need to be removed to install on wall. 80 lbs 36 kg of animal immunity. The 2gig-xcvr2 transceiver module is designed to be used with the 2GIG Go!Control Security System control panel. Wireless door or window sensor for use with 2gig or Vivint control panels 345MHz.

Range 35 x 40 11 m x 12 m pattern. Cdma cellular technology. Fully supervised. Home Security. Has an external input that accepts N/C dry contact devices. The transceiver is a dual frequency device. Long. 2gig technologies 2gig-LTEV-A-GC2. 4-button Key Ring Remote. High quality and nearly identical to 2gig's DW10 Reed sensitivity: 0

2gig DW20R Recessed Door Contact ETL Listed - 625 in. Integrates with 12-Volt panels. 2. 16 cm typical. 7'-9' mounting height.

More information about 2gig 2GIG-DW20R


Similar products



2gig UPCBL2 Firmware Update Cable for TS1 Black

2gig UPCBL2 - Comes with an adjustable magnet that has the additional feature of compatibility for custom sized doors/windows. Equipped with cover tamper for additional security. Converts 8 zones per module additional modules may be added. Wireless door or window sensor for use with 2gig or Vivint control panels 345MHz. The transceiver is a dual frequency device.

Provides 2-Way Voice Communications. Designed to be used with the 2gig security system control panel. The transceiver is a dual frequency device^ it receives 345 mhz signals from the system sensors^ and receives and transmits 900 mhz signals to and from the model 2gig-ts1 wireless keypad^To use a model 2gig-ts1 wireless keypad with the 2gig security system control panel^ The 2gig-xcvr2 tranceiver module must be installed into the control panel.

2gig UPCBL2 Firmware Update Cable for TS1 Black - Control panel must be running firmware version 1. 8 or greater to function with this transceiver. The 2gig-xcvr2 transceiver module is designed to be used with the 2GIG Go!Control Security System control panel. Fully supervised. Must have 1. 9. 4 or higher Firmware OTA Updates.

More information about 2gig UPCBL2


Similar products