Genie GWC-R Push Universal Wall Button, 7.5x6x.8, Blue Clamshell, 6 Piece

Genie GWC-R - Operate garage from inside: this Genie universal non-lit wall button mounts on a garage side wall to operate the garage door from inside the garage. Universally compatible: This door wall button is universally compatible with most major garage door opener brands. Additional wall button: This garage door wall button can be used in addition to any existing wall button or wall console.

Easy installation: installation is quick and easy, and all mounting hardware and installation instructions are included. This universal wall push button is compatible with most pre-2011 Genie garage door openers and current Genie Series II garage door openers, and most major garage door opener brands. This non-lit door wall button is universally compatible with most major garage door opener brands, and can be used in addition to any existing wall button or wall console.

Genie GWC-R Push Universal Wall Button, 7.5x6x.8, Blue Clamshell, 6 Piece - . Open and close your garage door with ease from inside the garage, thanks to the Genie Universal Wall Button. Installation is quick and easy and all mounting hardware and installation instructions are included. The non-lit wall button mounts to a side wall and wires directly to the garage door opener. Cannot be used on series III generation Genie units or Liftmaster/Chamberlain/Craftsman 2.

0 Direct wiring to the garage door opener is required.

More information about Genie GWC-R

Universal Garage Door Wire 35265B 2 Conductor Bell Wire for Control Station / Sensors, Genie

Genie CECOMINOD043188 - 90ft length rolls. For use with wall buttons or safety sensors. Add new wire for a new install, or use to replace existing damaged wiring. Universal- works with most garage door openers. Wire, 90' spool, 2 conductor wire for damaged wire repair.

More information about Genie CECOMINOD043188


Similar products



GENIE Garage Door Openers 36442A Wall Button and Screws

The Genie Company CECOMINOD023375 - Universal- works with most garage door openers. Add new wire for a new install, or use to replace existing damaged wiring. Genie garage door openers Wall Button and Screws 90ft length rolls. For use with 1024, ouietlift 600, chainlift 600, origin 600, 1022, 1026 and Standard Drive. Genie garage door Openers Wall Button and Screws.

More information about The Genie Company CECOMINOD023375


Similar products



Genie Safe-T-Beam Garage Door Safety Beams Set – Replacement Kit For Genie Garage Door Openers

The Genie Company GSTB-R - The genie safe-t beam system is designed to ensure maximum safety for your garage door opener operation. 90ft length rolls. Add new wire for a new install, or use to replace existing damaged wiring. Using an invisible infrared beam across the opening of the door, the system detects any object passing through the LED beam of light and automatically reverses the closing garage door, keeping children and pets safe.

Once installed, your replacement safety beams are self-diagnostic and will alert you in the event of any malfunction. If your safe-t beam system has been damaged, a replacement kit is essential to continue safe operation of your garage door opener. Genie garage door Openers Wall Button and Screws. Installation is easy, with mounting brackets and hardware included with purchase.

Genie Safe-T-Beam Garage Door Safety Beams Set – Replacement Kit For Genie Garage Door Openers - For use with 1024, origin 600, ouietlift 600, 1022, chainlift 600, 1026 and Standard Drive. Replacement kit: replaces broken or faulty safety beams in your Genie garage door opener's Safe-T Beam system. Works with many genie openers: Compatible with Genie only garage door openers manufactured since 1993 that utilize required safety beams.

Keeps family and pets safe: places an invisible infrared beam across the door opening and reverses door automatically if an object passes through the LED beam of light. Self-diagnostic: alerts you of any malfunction in installation or operation, as an additional safety measure.

More information about The Genie Company GSTB-R


Similar products



Illuminated Universal Wall Mounted Push Button

Accessories CECOMINOD003413 - 90ft length rolls. Add new wire for a new install, or use to replace existing damaged wiring. 2 wire works on any garage door opener. Works with both AC and DC openers. Genie garage door Openers Wall Button and Screws. Works with both AC and DC openers. Universal- works with most garage door openers. For use with 1024, ouietlift 600, origin 600, 1022, chainlift 600, 1026 and Standard Drive.

Replacement kit: replaces broken or faulty safety beams in your Genie garage door opener's Safe-T Beam system. Works with many genie openers: Compatible with Genie only garage door openers manufactured since 1993 that utilize required safety beams. Keeps family and pets safe: places an invisible infrared beam across the door opening and reverses door automatically if an object passes through the LED beam of light.

Illuminated Universal Wall Mounted Push Button - Self-diagnostic: alerts you of any malfunction in installation or operation, as an additional safety measure. Easy installation: Replacement kit is easy to install, with mounting brackets and hardware included. Illuminated Universal Wall Mounted Push Button. High impact weather resistant plastic lighted button.

2 wire works on any garage door opener. High impact weather resistant plastic lighted button.

More information about Accessories CECOMINOD003413


Similar products



Genie 1995-Current Series II Lighted Wall Button

Genie GWB-BL GWC-BX - Add new wire for a new install, or use to replace existing damaged wiring. Works with both AC and DC openers. Genie 1995-current Series II Intellicode Wall Button. Genie 1995-current series II Intellicode Wall Button 90ft length rolls. Genie garage door Openers Wall Button and Screws. Universal- works with most garage door openers.

For use with 1024, chainlift 600, origin 600, Ouietlift 600, 1022, 1026 and Standard Drive. Replacement kit: replaces broken or faulty safety beams in your Genie garage door opener's Safe-T Beam system. Works with many genie openers: Compatible with Genie only garage door openers manufactured since 1993 that utilize required safety beams.

Genie 1995-Current Series II Lighted Wall Button - Keeps family and pets safe: places an invisible infrared beam across the door opening and reverses door automatically if an object passes through the LED beam of light. Self-diagnostic: alerts you of any malfunction in installation or operation, as an additional safety measure. Easy installation: Replacement kit is easy to install, with mounting brackets and hardware included.

Illuminated Universal Wall Mounted Push Button. High impact weather resistant plastic lighted button. 2 wire works on any garage door opener.

More information about Genie GWB-BL GWC-BX


Similar products



Genie Universal Dual Frequency Conversion Kit – Eliminates Frequency Interference and Upgrades Garage Door Openers Compatible with Most Opener Brands – Model GIRUD-1T

Genie GIRUD-1T - The genie universal conversion kit can also be used to upgrade older versions of garage door openers manufactured from 1993 to 1995 that may have less secure technology. Land mobile radio lmr systems are used by military bases across the US and were implemented as part of the nation’s Homeland Security efforts.

The girud is universal. Universal- works with most garage door openers. Rest easy knowing you property is safe and secure with the Genie GIRUD-1T Universal Dual Frequency Conversion Kit for your garage door opener. Installation instructions guide you through the assembly process for the universal dual frequency receiver, plug-in 12v transformer and G3T-R remote control transmitter.

Genie Universal Dual Frequency Conversion Kit – Eliminates Frequency Interference and Upgrades Garage Door Openers Compatible with Most Opener Brands – Model GIRUD-1T - 90ft length rolls. Alleviates frequency interference: the genie GIRUD-1T is designed to alleviate frequency interference issues from implemented Land Mobile Radio Communication systems that cause shortened opener range. Automatically seeks correct frequency: The Universal Dual Frequency Kit auto seeks the 315 or 390 Mhz so your opener responds regardless of nearby interference.

Upgrades old garage door openers: Upgrades or adds Intellicode security to older openers. Includes needed accessories: Kit comes with receiver box, wire and clips, transformer, wireless remote transmitter, mounting screws and instructions. Compatible with most major brands: Don't have a Genie garage door opener? No problem.

Genie garage door Openers Wall Button and Screws.

More information about Genie GIRUD-1T


Similar products



LiftMaster Garage Door Openers 41A4166 Lighted Push Button

Chamberlain 75LM - Liftmaster and chamberlain Brand garage door openers 1984 thru current. Only one lighted wall button should be used on any garage door opener. Liftmaster garage door openers 41A4166 Lighted Push Button 90ft length rolls. For use with 1024, ouietlift 600, 1022, chainlift 600, origin 600, 1026 and Standard Drive.

Replacement kit: replaces broken or faulty safety beams in your Genie garage door opener's Safe-T Beam system. Works with many genie openers: Compatible with Genie only garage door openers manufactured since 1993 that utilize required safety beams. Keeps family and pets safe: places an invisible infrared beam across the door opening and reverses door automatically if an object passes through the LED beam of light.

LiftMaster Garage Door Openers 41A4166 Lighted Push Button - Self-diagnostic: alerts you of any malfunction in installation or operation, as an additional safety measure. Easy installation: Replacement kit is easy to install, with mounting brackets and hardware included. Illuminated Universal Wall Mounted Push Button. High impact weather resistant plastic lighted button.

2 wire works on any garage door opener. The girud is universal. Liftmaster garage Door Openers Lighted Push Button. Genie garage door Openers Wall Button and Screws.

More information about Chamberlain 75LM


Similar products



The Genie Company GK-R Wayne Dalton Wireless Keypad, for Use with Garage Doors, 315/390 Mhz, 1 Pack

The Genie Company GK-R - Works with both AC and DC openers. Genie 1995-current Series II Intellicode Wall Button. The keypad features a back light which means you can easily see to enter your code even at night. Liftmaster and chamberlain Brand garage door openers 1984 thru current. Only one lighted wall button should be used on any garage door opener.

Keyless garage access: Enter your garage without needing to carry a key with the Genie wireless keyless entry pad. Safe and secure: Intellicode technology prevents access to your garage by unauthorized persons. Compatible with all genie intellicode openers: Works with Genie single or dual frequency openers manufactured since 1995.

The Genie Company GK-R Wayne Dalton Wireless Keypad, for Use with Garage Doors, 315/390 Mhz, 1 Pack - Auto seek dual frequency: Ensures the opener will respond regardless of possible nearby frequency interference. Easy installation and use: Mounts with screws included and features a back-lit keypad and flip cover. Add new wire for a new install, or use to replace existing damaged wiring. For use with 1024, ouietlift 600, origin 600, chainlift 600, 1022, 1026 and Standard Drive.

Replacement kit: replaces broken or faulty safety beams in your Genie garage door opener's Safe-T Beam system. Works with many genie openers: Compatible with Genie only garage door openers manufactured since 1993 that utilize required safety beams. Keeps family and pets safe: places an invisible infrared beam across the door opening and reverses door automatically if an object passes through the LED beam of light.

More information about The Genie Company GK-R


Similar products



Genie 35421A Garage Door Opener Header Bracket Genuine Original Equipment Manufacturer OEM Part

Genie 35421A.S - Header bracket 35421a connects the garage door opener rail to the garage wall above the door. Works with both AC and DC openers. Genie 1995-current Series II Intellicode Wall Button. Genie garage door Openers Wall Button and Screws. This header bracket part number 35421A is for garage door openers. Universal- works with most garage door openers.

For use with 1024, origin 600, chainlift 600, 1022, Ouietlift 600, 1026 and Standard Drive. Replacement kit: replaces broken or faulty safety beams in your Genie garage door opener's Safe-T Beam system. Works with many genie openers: Compatible with Genie only garage door openers manufactured since 1993 that utilize required safety beams.

Genie 35421A Garage Door Opener Header Bracket Genuine Original Equipment Manufacturer OEM Part - Keeps family and pets safe: places an invisible infrared beam across the door opening and reverses door automatically if an object passes through the LED beam of light. Self-diagnostic: alerts you of any malfunction in installation or operation, as an additional safety measure. Easy installation: Replacement kit is easy to install, with mounting brackets and hardware included.

Illuminated Universal Wall Mounted Push Button. High impact weather resistant plastic lighted button. 2 wire works on any garage door opener. Wear work gloves to protect your hands.

More information about Genie 35421A.S


Similar products



LiftMaster 883LM Security+ 2.0 MyQ Door Control Push Button

LiftMaster CECOMINOD009240 - Compatible only with security+2. 0tm liftmaster® garage door openers enabled by MyQ® technology. Works with both AC and DC openers. Genie 1995-current Series II Intellicode Wall Button. Part may differ in appearance but is a functional equivalent to prior parts including; 22668A04. Universal- works with most garage door openers.

Genuine original equipment Manufacturer OEM part. Programming capability makes it easy to program remote controls and MyQ® enabled accessories. 90ft length rolls. It controls one garage door opener and can be used to program remote controls and MyQ® enabled accessories. Genie garage door Openers Wall Button and Screws.

LiftMaster 883LM Security+ 2.0 MyQ Door Control Push Button - The new liftmaster door Control Button puts quick control at your fingertips, without taking up too much space. Compatible Brands: Genie. Add new wire for a new install, or use to replace existing damaged wiring. Liftmaster and chamberlain Brand garage door openers 1984 thru current. Only one lighted wall button should be used on any garage door opener.

Keyless garage access: Enter your garage without needing to carry a key with the Genie wireless keyless entry pad.

More information about LiftMaster CECOMINOD009240


Similar products