GoControl/Linear GD00Z-4 Z-Wave Garage Door Opener Remote Controller, Small, Black

Linear GD00Z-4 - Nortek security & control/go control has been providing best-in-class home & business control solutions for over 50-years and is a leading worldwide mfg. This product requires the use and pre-installation of a Z wave HUB. Add z-wave control to your current garage door opener. Linear z-wave products provide up to 100 feet range between the wireless controller and/or the closest Z-Wave device.

Provides both audible and visual warnings prior to door movement. Easy to install and use. Of z-wave products. Compatible with virtually any automatic garage opener w-sectional garage door. Garage door position sensor frequency: 345 MHz. Specifications - power: 120vac, garage door position sensor frequency: 345 MHz, 50/60 Hz, Z-Wave Frequency: 908.

GoControl/Linear GD00Z-4 Z-Wave Garage Door Opener Remote Controller, Small, Black - 42 mhz. Z-wave garage door opener remote controller Go control z-wave products provide up to 100 feet range between the wireless controller and/or the closest z-wave device. Linear has been providing best-in-class home & business control solutions for over 50-years and is a leading worldwide mfg. Of z-wave products.

More information about Linear GD00Z-4

Aeotec Range Extender 6, Z-Wave Plus Repeater, 2 Pack

Aeotec ZW117-A x 2 - Small design so it does not block other outlets. Compatible with all z-wave gateways including Control4, Fibaro, SmartThings, Vera and more. Z-wave plus certified. Z-wave plus wireless signal repeater and range extender. Certification number: ZC10-16095239. Compatible with Z-Wave and Z-Wave Plus. Amplifies and repeats weak signals boosting the range and reliability of weak Z-Wave devices.

Plug in to 110 volt wall socket.

More information about Aeotec ZW117-A x 2


Similar products



GE Enbrighten Z-Wave Plus Smart Receptacle Outlet, On/Off, Tamper Resistant, 1 On / 1 Controllable, for Lighting/Appliances, Zwave Hub Required, Works with SmartThings, Wink, and Alexa, 14288, White

Jasco 14288 - Compatible with all z-wave gateways including Control4, Fibaro, SmartThings, Vera and more. Z-wave plus certified. The receptacle replaces your current electrical outlet, uses your existing wiring and provides a Z-Wave enabled outlet for the lamp or appliance that you would like to control and a standard pass-through AC outlet for other electrical appliances.

Works with alexa for voice control hub required; Alexa device and hub sold separately. Wirelessly control lights or appliances by turning them on and off, Halogen, or create a custom scene from anywhere in the world, at any time of the day. This product cannot connect directly with ECHO PLUS Only ZigBee products can connect directly to Echo Plus.

GE Enbrighten Z-Wave Plus Smart Receptacle Outlet, On/Off, Tamper Resistant, 1 On / 1 Controllable, for Lighting/Appliances, Zwave Hub Required, Works with SmartThings, Wink, and Alexa, 14288, White - Take control of your home lighting with ge z-wave plus wireless smart lighting controls! this product is ALEXA COMPATIBLE however it REQUIRES AN ALEXA SUPPORTED HUB for voice control with Echo Products Alexa device and hub sold separately. Works with all led, cfl, schedule a timed event, and Incandescent bulbs.

Features one always-on pass-through AC outlet and one Z-Wave enabled outlet with tamper resistant outlets. Requires in-wall installation with hard-wired connections - Neutral wire is REQUIRED wall plate not included. The ge z-wave duplex receptacle enables wireless control of on/off functions from the Z-Wave controlled outlet, and is compatible with incandescent, Xenon, Halogen, LED, fluorescent and compact fluorescent bulbs.

Certification number: ZC10-16095239.

More information about Jasco 14288


Similar products



GE Enbrighten Z-Wave Plus Smart Light Switch, Works with Alexa, Google Assistant, SmartThings, Wink, Zwave Hub Required, Repeater/Range Extender, 3-Way Compatible, White Toggle, 14292

Jasco Products Company 14292 - Works with alexa for voice control hub required; Alexa device and hub sold separately. Wirelessly control lights or appliances by turning them on and off, or create a custom scene from anywhere in the world, Halogen, at any time of the day. Expand your control with the GE-branded Enbrighten Z-Wave Plus In-Wall Smart Switch.

Up to four add-on switches can be connected to the same device. Full-home coverage - z-wave plus works with all previous z-wave generations to allow continued expansion of your home-automation network. Wirelessly control and schedule indoor or outdoor fixtures for effortless management of your home. Z-wave plus wireless signal repeater and range extender.

GE Enbrighten Z-Wave Plus Smart Light Switch, Works with Alexa, Google Assistant, SmartThings, Wink, Zwave Hub Required, Repeater/Range Extender, 3-Way Compatible, White Toggle, 14292 - Compatible with Z-Wave and Z-Wave Plus. Amplifies and repeats weak signals boosting the range and reliability of weak Z-Wave devices. Plug in to 110 volt wall socket. Operating temperature range 32-104 degrees Fahrenheit. Extended signal range increases your home automation coverage to enhance your control. Easy installation - requires indoor in-wall installation with hardwired connections.

Compatible with the following z-wave certified hubs: smartThings, Wink, HomeSeer, Harmony Home Hub Extender, ADT Pulse, Honeywell, Nexia, Vera, Trane, Vivint, Connect and Iris. Certification number: ZC10-16095239.

More information about Jasco Products Company 14292


Similar products



White - Zigbee - Samsung SmartThings Motion Sensor GP-U999SJVLBAA with Slim Design and Optional Automated Alerts

Samsung HI GP-U999SJVLBAA - Operating temperature range 32-104 degrees Fahrenheit. 24/7 monitoring: receive alerts when there's unexpected movement in your home. Home automation is simple through custom scenes, versatile scheduling and convenient alerts. 3-way ready - the smart device operates perfectly on its own or seamlessly integrates into multi-switch setups with required add-on switches - models 12728 or 46200

This device is compatible with the SmartThings ADT Security Hub, but is not compatible with ADT professional monitoring services. Alexa compatible - requires an alexa supported hub for voice control with echo products Alexa device and hub sold separately. Home automation: set devices to automatically turn on or off as people come and go to minimize energy usage.

Works with the following z-wave certified hubs: smartthings, ring Alarm, Trane, Nexia, Wink, ADT Pulse, Harmony Home Hub Extender, Honeywell, HomeSeer, Vivint, ADT Command, Vera and more. Hassle-free operation - control the device remotely with your smartphone and voice commands when connected to a compatible hub or enjoy manual ON/OFF operation from the switch.

White - Zigbee - Samsung SmartThings Motion Sensor GP-U999SJVLBAA with Slim Design and Optional Automated Alerts - . Works with all led, cfL, incandescent and halogen bulbs as well as other devices. Compatible with the following z-wave certified hubs: smartThings, HomeSeer, Harmony Home Hub Extender, ADT Pulse, Vivint, Trane, Wink, Nexia, Vera, Honeywell, Connect and Iris. Extended signal range increases your home automation coverage to enhance your control.

More information about Samsung HI GP-U999SJVLBAA


Similar products



Z-Wave Plus Rare Earth Magnets Door & Window Sensor, White & Brown DWZWAVE2.5-ECO

Ecolink 28617953415 DWZWAVE2.5-ECO - Ecolink is a leading developer of low power, highly reliable wireless solutions, including a wide range of intelligent wireless security, sensing and home automation devices. Dimensions: 3. 35”l x. 97”w x. 93”h. Z-wave plus wireless signal repeater and range extender. Wall plate not included. Homeseer. Alexa compatible - requires an alexa supported hub for voice control with echo products Alexa device and hub sold separately.

Home automation is simple through custom scenes, versatile scheduling and convenient alerts. 3-way ready - the smart device operates perfectly on its own or seamlessly integrates into multi-switch setups with required add-on switches - models 12728 or 46200 The switch is capable of controlling indoor or outdoor fixtures for whole-home automation and repeats your Z-Wave signal from your hub or other devices to extend your range by up to 150ft.

Compatible with the following z-wave certified hubs: smartThings, ADT Pulse, Harmony Home Hub Extender, Trane, Nexia, HomeSeer, Wink, Honeywell, Vera, Vivint, Connect and Iris. Works with the following z-wave certified hubs: smartthings, adt Pulse, Honeywell, Trane, Harmony Home Hub Extender, Nexia, ADT Command, Ring Alarm, HomeSeer, Wink, Vivint, Vera and more.

Z-Wave Plus Rare Earth Magnets Door & Window Sensor, White & Brown DWZWAVE2.5-ECO - Hassle-free operation - control the device remotely with your smartphone and voice commands when connected to a compatible hub or enjoy manual ON/OFF operation from the switch. Works with all led, cfL, incandescent and halogen bulbs as well as other devices. Compatible with all z-wave gateways including Control4, SmartThings, Fibaro, Vera and more.

More information about Ecolink 28617953415 DWZWAVE2.5-ECO


Similar products



Aeotec Range Extender 6, Z-Wave Plus repeater

Aeon Labs LLC ZW117 - You use z-wave to manage your smart home. Compatible with all z-wave gateways including Control4, Fibaro, SmartThings, and Vera. Z-wave plus certified. Wall plate not included. Certification number: ZC10-16095239. Designed to use z-wave plus, unlike previous editions Range Extender 6 can work with advanced Z-Wave features such as encryption and security devices such as door locks while remaining compatible with older versions of Z-Wave.

It repeats signals 250% faster than other signal repeaters and can repeat Z-Wave signals up to 492 feet away when unobstructed. Small design so it does not block other outlets. Home automation is simple through custom scenes, versatile scheduling and convenient alerts. 3-way ready - the smart device operates perfectly on its own or seamlessly integrates into multi-switch setups with required add-on switches - models 12728 or 46200

Aeotec Range Extender 6, Z-Wave Plus repeater - Natively compatible with SmartThings, it works with most brands of ZWAVE home security hubs. Requirements: must have smartthings App and SmartThings Hub or compatible device with SmartThings Hub functionality connected devices sold separately. As it's custom desgined as a wireless signal booster, Range Extender 6 performs better than other Z-Wave devices that offer simply repeating; it amplifies the signal too.

Certification number: ZC10-16095239. Operating temperature range 32-104 degrees Fahrenheit.

More information about Aeon Labs LLC ZW117


Similar products



White - Samsung SmartThings Button GP-U999SJVLEAA One-Touch Remote Control for Lights, Appliances, and Scenes - SmartThings Hub Compatible - ZigBee

Samsung HI GP-U999SJVLEAA - Works with all led, schedule a timed event, CFL, and Incandescent bulbs. Features one always-on pass-through AC outlet and one Z-Wave enabled outlet with tamper resistant outlets. Requires in-wall installation with hard-wired connections - Neutral wire is REQUIRED wall plate not included. Voice control - alexa & google assistant compatible requires a z-wave certified hub.

Includes: quick start guide, health and safety guide, and SmartThings Button. Tell the smartthings button to turn your lights on when you wake up or lock your door when you leave. Certification number: ZC10-16095239. Compatible with all z-wave gateways including Control4, SmartThings, Fibaro, Vera and more.

White - Samsung SmartThings Button GP-U999SJVLEAA One-Touch Remote Control for Lights, Appliances, and Scenes - SmartThings Hub Compatible - ZigBee - Z-wave plus certified. This device is compatible with the SmartThings ADT Security Hub, but is not compatible with ADT professional monitoring services. Home automation is simple through custom scenes, versatile scheduling and convenient alerts. 3-way ready - the smart device operates perfectly on its own or seamlessly integrates into multi-switch setups with required add-on switches - models 12728 or 46200

Natively compatible with SmartThings, it works with most brands of ZWAVE home security hubs. Not compatible with neST, Sonos, D Link, and Blink devices. Requires a smartthings Hub or compatible device with SmartThings Hub functionality and SmartThings App.

More information about Samsung HI GP-U999SJVLEAA


Similar products



LINGCTBZ48 - GoControl GC-TBZ48 Z-WaveR Battery-Powered Smart Thermostat

Nortek BRO-NTBZ48 - Detection ready:  adjust the sensor with the quick tilt magnetic ball mount to capture motion up to 15 feet with 120 degree view range. Compatible with all z-wave gateways including Control4, SmartThings, Fibaro, Vera and more. Z-wave plus certified. Vera plus, vera edge, V1, Vera Lite. Compatible with all z-wave gateways including Control4, Fibaro, SmartThings, and Vera.

Z-wave plus certified. Works with alexa for voice control hub required; Alexa device and hub sold separately. Wirelessly control lights or appliances by turning them on and off, or create a custom scene from anywhere in the world, Halogen, at any time of the day. The 7-character scrolling display makes programming simple.

LINGCTBZ48 - GoControl GC-TBZ48 Z-WaveR Battery-Powered Smart Thermostat - Supports z-wave flirs functionality. The gc-tbz48 works with most contemporary Central HVAC systems whether standard or heat pump which makes this thermostat a great solution for all retrofit or new construction needs. Natively compatible with SmartThings, it works with most brands of ZWAVE home security hubs.

Up to four add-on switches can be connected to the same device. Full-home coverage - z-wave plus works with all previous z-wave generations to allow continued expansion of your home-automation network. The switch is capable of controlling indoor or outdoor fixtures for whole-home automation and repeats your Z-Wave signal from your hub or other devices to extend your range by up to 150ft.

More information about Nortek BRO-NTBZ48


Similar products



GE Enbrighten Z-Wave Plus Smart Fan Control, Works with Alexa, Google Assistant, SmartThings, Wink, Zwave Hub Required, Repeater/Range Extender, 3-Way Compatible, White & Light Almond, 14287

Jasco 14287 - Extended signal range increases your home automation coverage to enhance your control. Easy installation - requires indoor in-wall installation with hardwired connections. Cannot connect directly with echo PLUS Only ZigBee products can connect directly to Echo Plus. Requires a z-wave certified gateway. Requirements: must have smartthings App and SmartThings Hub or compatible device with SmartThings Hub functionality connected devices sold separately.

Customizable functions: Easily set single tap, double tap, and long press to trigger customized functions. Supports z-wave flirs functionality. Compatible with Z-Wave and Z-Wave Plus. Amplifies and repeats weak signals boosting the range and reliability of weak Z-Wave devices. Plug in to 110 volt wall socket.

GE Enbrighten Z-Wave Plus Smart Fan Control, Works with Alexa, Google Assistant, SmartThings, Wink, Zwave Hub Required, Repeater/Range Extender, 3-Way Compatible, White & Light Almond, 14287 - Vera plus, vera edge, V1, Vera Lite. Z-wave plus wireless signal repeater and range extender. This product is alexa compatible however it requires an alexa supportED HUB for voice control with Echo Products Alexa device and hub sold separately. The one-of-a-kind fan switch easily replaces any standard in-wall switch and enables wireless control of ceiling fans anywhere in the world, at any time of the day.

Requirements: must have smartthings App and SmartThings Hub or compatible device with SmartThings Hub functionality connected devices sold separately.

More information about Jasco 14287


Similar products



GE Enbrighten Z-Wave Plus Smart Light Switch with QuickFit and SimpleWire, Works with Alexa, Google Assistant, SmartThings, Wink, Zwave Hub Required, Repeater/Range Extender, 3-Way Ready Toggle, 46202

Jasco Products Company 46202 - Works with all led, cfL, incandescent and halogen bulbs as well as other devices. Dlink staples connect. Neutral wire required. Works with the following z-wave certified hubs: smartthings, harmony Home Hub Extender, HomeSeer, ADT Command, Ring Alarm, Vivint, Nexia, Trane, ADT Pulse, Honeywell, Wink, Vera and more.

Versatile applications - control the device remotely with your smartphone and voice commands when connected to a compatible hub or enjoy manual ON/OFF operation from the switch. Dual ground ports, turned off or always on based on your indicator preferences. Easy installation - requires indoor in-wall installation with hardwired connections.

Works with all led, cfL, incandescent and halogen bulbs as well as other devices. While it may work with your ZWAVE hub, V2, Ecolink cannot guarantee it. Simple to install: easy installation by simply pulling the battery tab to begin the Learning process. Home automation is simple through custom scenes, versatile scheduling and convenient alerts.

GE Enbrighten Z-Wave Plus Smart Light Switch with QuickFit and SimpleWire, Works with Alexa, Google Assistant, SmartThings, Wink, Zwave Hub Required, Repeater/Range Extender, 3-Way Ready Toggle, 46202 - 3-way ready - the smart device operates perfectly on its own or seamlessly integrates into multi-switch setups with required add-on switches - models 12728 or 46200 The switch is capable of controlling indoor or outdoor fixtures for whole-home automation and repeats your Z-Wave signal from your hub or other devices to extend your range by up to 150ft.

Wirelessly control and schedule indoor or outdoor fixtures for effortless management of your home.

More information about Jasco Products Company 46202


Similar products