Physen Model X5 Waterproof Wireless Doorbells with 2 Push Button and 3 Plugin Receiver,Operating Range at 900 Feet,4 Adjustable Volume Levels and 52 Chimes,No Battery Required for Receiver 2T4

Physen - 1. Specifications:voltage of plug-in receiver: AC 110VUSSound Volume: 30-110dB, 4 levelsWorking frequency:433. 92mhzwireless distance:1000 feet in open airWorking temperature: -30℃-70℃2. Pairing instruction:Our doorbell button and receiver can freely matched with each other. For example:1 button can pair with 2 or more receivers, Or 2 or more buttons can paired with the same one receiver and can set the receiver for different ringtones.

The below steps can help you make the transmitter pair with the receiver:1 Plug receiver into outlet and press Music Control Button to choose your favorite music. 2 after choose the music, then long press Volume Control Button for about 5-7 seconds until you can hear receiver "ding" and blue led light will be flashed.

3 when the blue led light flashed, you should immediately press the transmitter button to pair with the receiver and you can hear the tune you selected which mean your operation was successful. Notice:receiver will automatically exit the pairing mode when it doesn't get signal from the transmitter in 5 seconds.

Physen Model X5 Waterproof Wireless Doorbells with 2 Push Button and 3 Plugin Receiver,Operating Range at 900 Feet,4 Adjustable Volume Levels and 52 Chimes,No Battery Required for Receiver 2T4 - 4press transmitter button to check about the pairing work. Then on this receiver to follow the above steps to pair with another transmitter, if you want to set the receiver for different tones, just choose another music and do the above steps to make it paired with another transmitter. 3. Product include:2*transmitter4*receiver2*screws&Anchors1*screwdriver2*double-sided adhesive tape1*user manual2*12V alkaline battery4.

More information about Physen

Gorilla 6065001 Tough & Clear Mounting Tape, Double-Sided, 1" x 60", Clear

Gorilla 6065001 - Press firmly, as gorilla mounting Tape conforms to the surface and creates a strong, PERMANENT bond. Avoid touching surface of tape. Remove clear liner and align object to desired placement. Double sided tape; Coated with adhesive on both sides for easy hanging. Crystal clear alternative to nails and fasteners; Won't yellow over time.

Click on the gorilla link at the top of this page to see other quality products from the Gorilla Glue Company. Completing diy projects is easy with this tough, double sided tape. Gorilla tough & clear mounting Tape is a clear double sided tape that mounts in an instant, for a long-lasting, weatherproof bond.

Gorilla 6065001 Tough & Clear Mounting Tape, Double-Sided, 1" x 60", Clear - Directions: apply tape to back of object vertically, allowing for even distribution of weight. The crystal clear adhesive tape won’t yellow over time, and holds up to 15 pounds! Gorilla Tough & Clear Mounting Tape is perfect for indoor and outdoor projects and sticks to smooth and rough surfaces. Once gorilla mounting tape is used to mount an object, it is meant to be held in place permanently, and not be removed.

Bonds to: brick, concrete, metal, plastic, stone, tile, glass, wood and more!. Cut tape and press to secure tape to object. Note: apply 4” of tape per 1lb of weight. Best for projects where typical fasteners won't work and you need a clear finish; Holds up to 15 lbs.

More information about Gorilla 6065001


Similar products