Top 10 D-tap to LP-E6 – Camera Power Adapters

As an Amazon Associate I earn from qualifying purchases.

1. Neewer

#ad

5DS R, 90D, Neewer DR-E6 DC Coupler Replacement for LP-E6 Dummy Battery Power Adapter with D-Tap Cable Compatible with Canon 5D Mark II III IV, R5, 7DII, R6 Camera, 80D, EOS R, 6DII, 5DS, 70D, 6D, 7D

#ad
Neewer #ad - P>input voltage: please ensure that the output of the power source does not exceed 16. 8v. P>high power output: suitable for cameras, monitors, and LED lights. P>safe: built-in fully decoded protective circuit; Built-in protection of high-power booster overvoltage, overcurrent, and short circuit.

Note: it can't be used for blackmagic camera; please note the correct installation steps and it is good for your device and dummy battery cable: Firstly plug the D-Tap into the battery, then load the dummy battery into the battery compartment, and finally turn on your device. P>function: takes the place of the lp-e6 type battery pack and provides a connection to the power source for the long-term, continuous operation of your camera.

The output is about 8V. Portable and simple to operate. P>compatibility: compatible with canon 5d mark ii iii iv, 7dii, 90d, 80d, 6dii, r6 camera; please note: it can't be used for blackmagic camera, R5, 5DS, 70D, 5DS R, 7D, EOS R, 6D, please don't use it for the others that we do not mention. It is the best choice for a long time photography for studio and indoor shooting. Largely prolong the working time of them.
BrandNeewer #ad
ManufacturerNEEWER #ad
Weight0.15 Pounds
Part Number10098228
Model10098228

2. KONDOR BLUE

#ad

KONDOR BLUE Coiled Braided D-Tap to LPE6 Dummy Battery Cable Compatible Canon EOS R R5 R6 5DII 5DIII 5DIV 6D 6DII 70D 7D 7DII 80D 90D DSLR Camera

#ad
KONDOR BLUE #ad - Connect d-tap Sources to Your Device. Kondor blue | lifetime warranty. Input voltage: 12v - 17v;output voltage: 8V Regulated; Output Current: 2A. 16" contracted to 36" Extended Length. D-tap to dummy Battery Connectivity.
BrandKONDOR BLUE #ad
ManufacturerKondor Blue #ad
Part NumberKB_DTAP_CLPE6

3. Acouto

#ad

Acouto D-Tap Charger Male to LP-E6 Battery Power Cable Adapter DC Coupler Replace Dummy Battery for Canon 5D II/III/IV 5DSR 6D 6DII 60D 70D 80D 7D 7DII DSLR Cameras

#ad
Acouto #ad - Safty use protectionthe power adapter is made of high-quality abs + pc environmental protection materials which has stable transmission, good electrical properties, transformer class VI energy efficiency, overcurrent, shortage, temperature protection, ratio ordinary adaptor more energy saving.

Portable chargerd-tap male to lp-e6 battery power cable extra long cord is long enough from your device to the wall outlet. When purchase the adapter please check your camera model first. High efficiency working uninterrupted power supply for long time, indoor or baby shooting all can use the adapter for keep you have enough power working, or for you to complete long-term studio shooting, tv, shooting video recording, outdoor, connecting to the PC, let your video shooting without need to change batteries.

The portable power adapter provides convenience for charging in different occasions such as travel, home, studio, office, etc. When you need take a wedding, VCR, terminal for online video chat conferences and more applicable scenarios. 2. Insert the dummy battery into the battery cavity. Simple replacement steps1. Turn off the camera power, turn on camera. Importance:need fully close the battery cavity door, take out the camera battery.
BrandAcouto #ad
ManufacturerAcouto #ad
Height0.79 Inches
Length1.97 Inches
Weight0.09 Pounds
Width0.79 Inches
Part NumberAcouto5aedvbkth7

4. FOTGA

#ad

Fotga Extendable Power Adapter Cable for D-Tap Connector to Dummy Battery LP-E6 for Canon EOS R R5 R6 5DII 5DIII 5DIV 6D 6DII 70D 7D 7DII 80D 90D DSLR Camera SmallHD Monitor 501 502 702

#ad
FOTGA #ad - Input:10v-20v, output: 7. 6v/2a. Dummy battery lp-e6, suitable for canon eos 5d2 5d 5d4 6d 60d 6D2 7D 70D 7D2 80D 5DSR. Fotga power adapter cable for d-tap connector to dummy battery lp-e6 for canon EOS 5D2 5D 5D4 6D 60D 6D2 7D 70D 7D2 80D 5DSR Camera Camera. Package includes: 1 x power cable for D-Tap to LP-E6 Dummy Battery. Work with sony battery and Anton battery with D-tap output. Cable length: 35cm-120cm.
BrandFOTGA #ad
ManufacturerFotga #ad
Weight0.11 Pounds
Part NumberNJ241

5. Alvin's Cables

#ad

Alvin's Cables New DR E6 Dummy Battery to D Tap Cable for Canon 5D4 5DSR 5D2 5D3 6D 60D 7D 7D2 70D 80D

#ad
Alvin's Cables #ad - Please contact us if the cable you received is defective or doesn't work. Please note, then load the dummy battery into the battery compartment, this is the correct installation steps, it is good for your device and dummy battery cable: Firstly plug the D-Tap into the battery, and finally turn on your device.

Please ensure that the output of the power source does not exceed 16. 8v. The output is about 8V. Every cable was tested to ensure that there are no short circuit, no potential breakdown problems before shipping. Cable length:39inches about 1 meters in stock better than beforewe can customize cables with other length, if you need custom cables, please send a message to us before placing the order. Plug a: canon dr e6 dummy battery dr-e6 is the same as LP-E6 Dummy Battery; Plug B: D-tap. For canon 5d4 5dsr 5d2 5d3 6d 60d 7d 7d2 70d 80d.

It can't be used for blackmagic camera either, not lp e6 real lithium battery, the appearance is different from the LP E6 real lithium battery, we could call it DR E6 dummy battery too, this is dummy battery cable, but it will work for the device we mentioned above. Please note, we do not recommend using it on the smallhd monitor. Therefore, due to the large power of the SmallHD monitor, please contact us first, thanks!. We will solve the problems properly or send you a new replacement at once.
BrandAlvin's Cables #ad
ManufacturerAlvin's Cables #ad
Part NumberCB-NZE6TDT
ModelNZE6TDT

6. Eonvic

#ad

Eonvic D-Tap to LP-E6 Dummy Battery Adaptor Power Cable for SmallHD 501/502 702 Monitor Coiled line

#ad
Eonvic #ad - Cable length:min length 18 inches, Maximum stretch length about 35 inches. Eonvic seller is Only a Genuine Seller. Input voltage: 14.

8v - 16v;output voltage: 8V stabilized; Output Current: 2A;. Please note that it is can't use for voltage over 16V battery to power it !!That is why some SmallHD 702 Monitors can't working well. Dear buyer, please recognize eonvic original packaging. The switronix new lp-e6 to d-tap power Cable allows you to power anything using a LP-E6 battery with an external power source. That means that you'll have the full force of the Eonvic Manufacturer Warranty to protect your purchase.
BrandEonvic #ad
ManufacturerEonvic #ad
Part NumberDtapB
ModelDtapB

7. POWRIG

#ad

POWRIG D-Tap to LP-E6 Dummy Battery Power Cable Adapter for SmallHD 501/502/702 Monitors with Voltage Display

#ad
POWRIG #ad - Led display voltage. Suitable for smallHD 501, 702. Dc 7. 2v output. Anti short-circuit design. 27. 5inch70cm max length.
BrandPOWRIG #ad
ManufacturerPOWRIG #ad
Part NumberPT-4336

8. FocusFoto

#ad

FocusFoto Fully Decoded LP-E6 Dummy Battery Power Adapter to D-tap Spring Cable for SmallHD 501 502 702 Monitor and Canon EOS 5D4 5DSR 5D2 5D3 6D 60D 7D 7D2 70D 80D

#ad
FocusFoto #ad - Spring cable, very convenient and easy to use and pack. No more interrupt during the shooting. Straight length 25cm, extended length 1m. Also compatible with canon dslr being powered by ANT0N Bauer batteries and SmallHD 501 / 502/ 702 Monitor.

You can power this cable of evfs or your canon 5d mark ii 60d/7d with pro v-mount or ant0n Bauer batteries. Input: 10v-24v ; output current: 2A ; Output Voltage: 8V stabilized. There is build-in voltage transformer, support 10v-24V wide voltage input. Compatibility: for canon eos 5ds, 6d, 5d mark iv, 70d, 60d, 7d mark ii, 7d, 80d, 5DS R, 5d mark ii, 5D Mark III, 60Da cameras. Connects any battery/battery mount with d-Tap female connector to any camera/monitor designed to be powered by LP-E6 battery Built-In emulator chip delivers battery status to camera indicator.
BrandFocusFoto #ad
ManufacturerFocusFoto #ad
Part NumberSFNJ241

9. FOMITO

#ad

For Canon EOS 5DS, 80D, 6D, 5D Mark II, 5DSR, 70D, 60D, Fomito LPE6 DR-E6 Dummy Battery to D-tap for V-Mount BP Battery, 5D Mark IV, 60Da, 7D Mark II, 5D Mark III, 7D

#ad
FOMITO #ad - 16" to 50" coiled cable for a flexible reach and neat setup. Plug a: lpe6 dummy battery; Plug B: Standard male D-Tap. Designed as an accessory replacement for canon eos 5d2 5d3 5d4 6d 6D2 60D 7D 7D2 70D 80D 90D 5DSR EOSR. With external high capacity v-mount or gold mount batteries, BP, ROLUX, PRO-X, Sony, farseeing, Wondlan, such as Anton Bauer, Dynacore. D-tap to lpe6 dc battery coupler, allow you to power devices using LPE6 ELPE6N battery.
BrandFOMITO #ad
ManufacturerFOMITO #ad
Part NumberFMTDTAPLPE6

10. Alvin's Cables

#ad

Alvin's Cables LP E6 Dummy Battery to D Tap Cable for Canon 5D4 5DSR 5D2 5D3 6D 60D 7D 7D2 70D 80D

#ad
Alvin's Cables #ad - Please contact us if the cable you received is defective or doesn't work. For canon 5d4 5dsr 5d2 5d3 6d 60d 7d 7d2 70d 80d. For smallhd 501/502 new version. We will solve the problems properly or send you a new replacement at once. Please ensure that the output of the power source does not exceed 16.

8v. The output is about 8V. Please note, this is the correct installation steps, it is good for your device and dummy battery cable: Firstly plug the D-Tap into the battery, then load the dummy battery into the battery compartment, and finally turn on your device. Plug a: lp e6 dummy battery dr E6; Plug B: D-tap. This is dummy battery cable, we could call it dr e6 dummy battery too, but it will work for the device we mentioned above About the detail, the appearance is different from the LP E6 real lithium battery, not LP E6 real lithium battery, welcome to contact us.

Cable length:min length 12 inches, Max length 36 inches. Please note, it can't be used for blackmagic camera, please don't use it for the others that we do not mention. Every cable was tested to ensure that there are no short circuit, no potential breakdown problems before shipping.
BrandAlvin's Cables #ad
ManufacturerAlvin's Cables #ad
Part NumberCBE6TDTH3