As an Amazon Associate I earn from qualifying purchases.
Geekworm #ad - Updatewe only keep the m2. 5*5+4mm, m2. 5*5+5mm, m2. 5*13+6mm spacers in the p165-a packing list, due to the Raspberry Pi expansion board usually with 12mm or 20mm height, the three spacers combination is enough in application.
Raspberry pi hat positioning hole is m2. 5 internal thread; this design is convenient to fix, use good quality mute 5v cooling fan, don't worry about the noise of fan. Supports the installation of 25mm fan; cooling fan can be added when the heat dissipation of a single aluminum heat sink is not enough, so that all Pi 4 heat dissipation problems can be solved.
This geekworm embedded armor aluminum alloy heatsink p165-a is only designed for raspberry Pi 4 Model B 1GB/2GB/4GB/8GB Version, ultra-thin embedded heatsink with ONLY 7mm thickness. User manual, refer to WiKi page search P165.
Geekworm #ad - Geekworm raspberry pi 4 passive cooling aluminum case - p173 is designed for Raspberry Pi 4 Model B computer only, support Raspberry Pi 4B 1GB/2GB/4GB/8GB version;. Note: the raspberry pi 4 model b is not included in the packing list.
Equipped with a copper heatsink to replace the thermal pad at the CPU part, and attach proper silicone grease not included on two sides of copper heatsink to get better heat dissipation. Access to all ports of raspberry Pi 4 Model B, GPIO cable interface is reservered, support to install the gpio cable.
Geekworm #ad - Matching metal case for rpi 4&x857 v2. 0&x735/x708, but note the power control switch should be connect to x735asin:b07r45w1ln/x708asin:b08DNRYM4Y, pls refer to X857-C3 CaseASIN:B08VJ6P48B, there is no PWR port for external power switch on X857 V2.
0 X857 v2. 0 msata adapter only design for raspberry pi 4 model b1gb/2gb/4gb/8gb, uasp supported for Pi 4, NOT support TRIM, Supports up to 1TB mSATA interface SSD hard disk. Allows booting os from your hdd/ssd for faster app opens, web serving and file copying, refer to Geekworm WiKi searchDoes_the_X825/X855_support_USB_boot.
How to power rpi 4&x857 v2. 0&x857 v2. 0: 5vdc +/-5%, powered by raspberry pi 4 type-c power in port; √ how to power rpi 4& x735: 5vdc +/-5%, powered by x735 Type-C or DC5525 Jack Power In port; Recommend to use Geekworm UL listed 5V 4A Type-C power adapter ASIN:B09J856PND. Also must format the new SSD before use.
Geekworm #ad - You must install shell script to enable the PWM fan to work since it need PWM signal to run, refer to X735 Software on WiKi. Not tested on openmediavault or other third party OS. User manual, refer to x735 software, refer to geekworm WiKi search X735, for the safe shutdown script, The software guide support X735 V2.
5/v3. 0 shield based on RASPBIAN. Update in 2022: x735 v2. 5 has been update to x735 v3. 0 version with width voltage dc 6v-30v input on march 28th 2022 and remove latching switch port.
0asin:b091jsrq9c, x883, x862asin:b088hcy4th, x850asin:b073chhfmp, x870, x825 v1.5, x857asin:b085hg7zlj, x822, x828, x820asin:b073cgqd9c, x860, x829, x832asin:b08ckbmjs1, x835, x872/x873, X852 to provide intelligent and safe power management;Reserved 40pin stackable header for add on boards. Note: do not apply power to x735 via type-c or micro-USB and via DC 5521 Jack 6-30V at the same time!!! .
Geekworm #ad - For raspberry pi 3b+, attach the big thin thermal tape on CPU; For Raspberry Pi 3B, attach the big thickness thermal tape on CPU. Geekworm raspberry pi 3b+/3b passive cooling aluminum case is designed for Raspberry Pi 3 Model B Plus and Raspberry Pi 3 Model B.
Access to all ports of raspberry pi 3 model b+ or raspberry Pi 3 Model B, GPIO cable interface and TF card slot is reservered, support to install the gpio cable and TF card.
Geekworm #ad - X825-c8 case only compatible with x825 v2. 0, not support x825 V1. 5 version. Support max 9. 5mm thickness 2. 5 inch sata hdd/ssd installation；. Please refer to wiki x825#document; Also the Bluetooth signal will be affected if use the metal case.
New x825-c8 metal case with power switch and cooling fan specially designed for x825 v2. 0 asin:b091jsrq9c& x735asin:b07r45w1LN, NOT support X825 V1. 5 version. Recommend to use with x735 power management board X735ASIN:B07R45W1LN.
Geekworm #ad - The above numbers behind M are for spacer/screw/nut tooth diameter x length, the unit is mm. Example: M2. 5 x 5mm Screws. M2. 5 series standoffs + nuts + screws, Quantity: 132pcs, come with the plastic storage box to protect and storage.
Note: 1. Popular size: as a reason of raspberry pi hat design: gpio pin connection expansion board is about 11 mm high and the screw hole diameter is 2. 75 mm, this spacer & screw & nuts pack is a perfect installation tool for Raspbery Pi 4 Model B, Raspberry Pi 3 Model B+ / 3B / 2B /B+/3A+/A+.
Packing list 4 x m2. 5x12+6mm spacers; 32 x m2. 5 x 5mm screws; 32 x m2. 5 nuts 16 x m2. 5x5 +5mm spacers; 16 x M2. 5x11mm spacers; 16 x M2. 5x11+6mm spacers; 16 x M2. 5x20+6mm Spacers. Compatible with 2019 latest raspberry pi 4 model b, raspberry pi 3 model a+ / raspberry Pi 3 Model B+ B plus; 2.
Geekworm #ad - Pi4 interface availableaccess to all ports of Raspberry Pi 4 Model B computer, raspberry pi 4 passive cooling case with better heat dissaption. Compatible withcnc aluminum alloy case customize for raspberry Pi 4, support Raspberry Pi 4 Model B 1GB/2GB/4GB/8GB Version.
Wifi descriptionwith black acrylic translucent plate to maximize compatibility with WiFi and Bluetooth signals, almost no weakness for WiFi and Bluetooth signals. Ultra-thin designultra-thin with ONLY 16mm thickness raspberry pi 4 aluminum cnc case.
Geekworm #ad - 2. Functionx728 provides 5. 1v 6000ma power backup for even the most demanding Raspberry Pi set ups, safe shutdown, intelligent and safe power management, full poweroff from software, auto power-on, and a real- time clock. Do not apply power to your rpi via the micro usb or usb type-c socket.
Important note√1. How to power & specificationspower supply via type-c socket : 5vdc ±5%, via dc power jack : 5vdc ±5%, ≥3a, ≥4a; ups output : 5.1v ±5% max 6a; ups charging current: 2.
Do not use 18650 battery with built-in protection circuit. 3. Please make sure the polarity of battery is "+" to "+" and "-" to "-" and match with the "+" "-" mark on battery holder!!! Applicationx728 reserves the 40-pin header to stack with other raspberry pi accessory boards for enhanced applications. User manual refer to geekworm wiki search x728; match metal case for x728, refer to x728-C1ASIN:B09Z6C64NN. Psu for x728, refer to asin: B09J856PND.
Geekworm #ad - Geekworm raspberry pi 4 model b power supply, usb c type c power adapter designed and tested for the raspberry pi 4 model b 1gb / 8gb version.
Output: 5v 4a 20w. Packing list: 1x 5v 4a us Plug Type-C Power Supply. Cable length: 1. 2 m / 47. 24 inches;. Power supply functions: over voltage protection; Under voltage protection; Over temperature protection; Over current protection; Short circuit protection.
1. Geekworm
#adGeekworm Raspberry Pi 4 7mm Embedded Heatsink with Fan P165-A, Raspberry Pi 4B Armor Aluminum Radiator with 5V Cooling Fan Compatible with Raspberry Pi 4 Model B Computer and Pi 4
#adRaspberry pi hat positioning hole is m2. 5 internal thread; this design is convenient to fix, use good quality mute 5v cooling fan, don't worry about the noise of fan. Supports the installation of 25mm fan; cooling fan can be added when the heat dissipation of a single aluminum heat sink is not enough, so that all Pi 4 heat dissipation problems can be solved.
More information #ad
Supports to cooling down the raspberry pi 4 board when using the pi 4 expansion boarddo not support poe board; it is compatible with Raspberry Pi 4 expansion board, X857ASIN:B085HG7ZLJ, for example: X825ASIN:B07VXF2HJG, X750ASIN:B07VPWFK9H to slove the raspberry pi 4 overheat problem. This geekworm embedded armor aluminum alloy heatsink p165-a is only designed for raspberry Pi 4 Model B 1GB/2GB/4GB/8GB Version, ultra-thin embedded heatsink with ONLY 7mm thickness. User manual, refer to WiKi page search P165.
| Brand | Geekworm #ad |
| Manufacturer | Geekworm #ad |
| Height | 0.28 Inches |
| Length | 2.56 Inches |
| Weight | 0.04 Pounds |
| Width | 2.17 Inches |
| Part Number | TB-2019-38 |
| Model | P165-A |
More information #ad
2. Geekworm
#adGeekworm Raspberry Pi 4 Aluminum Case, Raspberry Pi 4 Model B Heavy Duty Passive Cooling Metal Case/Housing with Heatsink Pillar for Raspberry Pi 4B Only-Black P173
#adEquipped with a copper heatsink to replace the thermal pad at the CPU part, and attach proper silicone grease not included on two sides of copper heatsink to get better heat dissipation. Access to all ports of raspberry Pi 4 Model B, GPIO cable interface is reservered, support to install the gpio cable.
More information #ad
Design with good heat dissipation, don't need to install the cooling fan or heatsink, net weight up to 184 grams, passive cooling design, this is a heatsink case. Reserve the TF Card slot for easy access. Made of high quality aluminum material. For raspberry pi 4 psu: recommend to use geekworm UL listed 5V 4A Type-C power adapter ASIN:B09J856PND.| Brand | Geekworm #ad |
| Manufacturer | Geekworm #ad |
| Height | 1.3 Inches |
| Length | 0 Inches |
| Weight | 0.32 Pounds |
| Width | 0 Inches |
| Part Number | TB-2019-45 |
| Warranty | 3 months |
More information #ad
3. Geekworm
#adGeekworm Raspberry Pi 4 mSATA SSD Adapter X857 V2.0, Raspberry Pi 4 Model B X857 V2.0 mSATA SSD Expansion Board USB3.0 Module for Raspberry Pi 4B UASP Supported ONLY
#ad0 X857 v2. 0 msata adapter only design for raspberry pi 4 model b1gb/2gb/4gb/8gb, uasp supported for Pi 4, NOT support TRIM, Supports up to 1TB mSATA interface SSD hard disk. Allows booting os from your hdd/ssd for faster app opens, web serving and file copying, refer to Geekworm WiKi searchDoes_the_X825/X855_support_USB_boot.
More information #ad
Important strongly recommend to use 5. 8g wifi ap instead of 2. 4g wifi ap, keyboard, display or use x857-c3 metal caseasin:b08vj6P48B, according to the feedback if use the external USB device like mouse, the system maybe unstable or not boot from the SSD. How to power rpi 4&x857 v2. 0&x857 v2. 0: 5vdc +/-5%, powered by raspberry pi 4 type-c power in port; √ how to power rpi 4& x735: 5vdc +/-5%, powered by x735 Type-C or DC5525 Jack Power In port; Recommend to use Geekworm UL listed 5V 4A Type-C power adapter ASIN:B09J856PND. Also must format the new SSD before use.
| Brand | Geekworm #ad |
| Manufacturer | Geekworm #ad |
| Height | 0.39 Inches |
| Length | 3.43 Inches |
| Weight | 0.11 Pounds |
| Width | 2.17 Inches |
| Part Number | TB-2019-65 |
| Model | X857 V2.0 |
More information #ad
4. Geekworm
#adGeekworm Raspberry Pi 4B/3B+/3B X735 V3.0 DC 6V-30V Width Voltage Input Power Management with Safe Shutdown & PMW Cooling Fan Expansion Board Compatible with Raspberry Pi 4 Model B
#ad5/v3. 0 shield based on RASPBIAN. Update in 2022: x735 v2. 5 has been update to x735 v3. 0 version with width voltage dc 6v-30v input on march 28th 2022 and remove latching switch port.
More information #ad
How to power x735 v3. 0：via type-c or micro-usb 5vdc +/-5%，≥3a; via dc 5521 Jack 6-30V width voltage inputNot support 5V power supply via DC jack. Fully compatible with raspberry pi x825 v2. 0asin:b091jsrq9c, x883, x862asin:b088hcy4th, x850asin:b073chhfmp, x870, x825 v1.5, x857asin:b085hg7zlj, x822, x828, x820asin:b073cgqd9c, x860, x829, x832asin:b08ckbmjs1, x835, x872/x873, X852 to provide intelligent and safe power management;Reserved 40pin stackable header for add on boards. Note: do not apply power to x735 via type-c or micro-USB and via DC 5521 Jack 6-30V at the same time!!! .
| Brand | Geekworm #ad |
| Manufacturer | Geekworm #ad |
| Height | 0.98 Inches |
| Length | 2.56 Inches |
| Weight | 0.11 Pounds |
| Width | 2.28 Inches |
| Part Number | TB-2019-06 |
More information #ad
5. Geekworm
#adRaspberry Pi 3B+/3B Aluminum Alloy Heavy Duty Passive Cooling Metal Case with Heatsink Pillar for Raspberry Pi 3 Model B+/Raspberry Pi 3 Model B-Black P252, Geekworm Raspberry Pi 3 B+ Case
#adAccess to all ports of raspberry pi 3 model b+ or raspberry Pi 3 Model B, GPIO cable interface and TF card slot is reservered, support to install the gpio cable and TF card.
More information #ad
Made of high quality aluminum material. Packing list: √1 x aluminum case for pi3; √4 x Thermal Pads; √1 x Mounting Screws Pack. Design with good heat dissipation, passive cooling design, net weight up to 207 grams, don't need to install the cooling fan or heatsink. With 4pcs thermal tapes to attach on your Raspberry Pi 3B+/3B. Note: the raspberry pi 3 board is not included in the packing list.| Brand | Geekworm #ad |
| Manufacturer | Geekworm #ad |
| Height | 1.42 Inches |
| Length | 3.58 Inches |
| Weight | 0.46 Pounds |
| Width | 2.56 Inches |
| Part Number | TB-2021-19 |
| Warranty | 3 months |
More information #ad
6. Geekworm
#adGeekworm X825-C8 X825 V2.0 Metal Case+Power Switch+Cooling Fan Support X825 V2.0 2.5 inch SATA SSD/HDD Shield & Raspberry Pi 4 Model B & X735 OnlyNot Include RPi4&X825 V2.0&X735&PSU&SSD&TF Card
#adNew x825-c8 metal case with power switch and cooling fan specially designed for x825 v2. 0 asin:b091jsrq9c& x735asin:b07r45w1LN, NOT support X825 V1. 5 version. Recommend to use with x735 power management board X735ASIN:B07R45W1LN.
More information #ad
We found that usb 3. 0 high-speed transmission will interfere with the raspberry pi's 2. 4g wifi signal. Important: the x825 v2. 0 2. 5" sata shieldasin:b091jsrq9c& x735 power management boardASIN:B07R45W1LN need to purchase seperately. So when install the Raspberry Pi 4 in the case, if you find the 2. 4g signal is unstable, please try to use WIFI 5G AP. User manual refer to Geekworm WiKi search X825-C8.| Brand | Geekworm #ad |
| Manufacturer | Geekworm #ad |
| Height | 4.45 Inches |
| Length | 3.74 Inches |
| Weight | 0.61 Pounds |
| Width | 2.17 Inches |
| Part Number | TB-2021-21 |
| Model | X825-C8 |
More information #ad
7. Geekworm
#adGeekworm Raspberry Pi Installation Tool 132 Pcs/Lot M2.5 Series Hex Brass Spacer/Standoff + Nuts + Screws w/Storage Case Raspberry Pi 4/3 Model B+Plus / 3B / Zero W/2W Accessories Kit
#adNote: 1. Popular size: as a reason of raspberry pi hat design: gpio pin connection expansion board is about 11 mm high and the screw hole diameter is 2. 75 mm, this spacer & screw & nuts pack is a perfect installation tool for Raspbery Pi 4 Model B, Raspberry Pi 3 Model B+ / 3B / 2B /B+/3A+/A+.
More information #ad
Durable material and long use life: standoffs are made of durable brass, strong, screws and nuts are made of stainless steel which anticorrosive, compact and portable. Packing list 4 x m2. 5x12+6mm spacers; 32 x m2. 5 x 5mm screws; 32 x m2. 5 nuts 16 x m2. 5x5 +5mm spacers; 16 x M2. 5x11mm spacers; 16 x M2. 5x11+6mm spacers; 16 x M2. 5x20+6mm Spacers. Compatible with 2019 latest raspberry pi 4 model b, raspberry pi 3 model a+ / raspberry Pi 3 Model B+ B plus; 2.
| Brand | Geekworm #ad |
| Manufacturer | Geekwrom #ad |
| Height | 0.79 Inches |
| Length | 3.07 Inches |
| Width | 2.56 Inches |
| Part Number | TB-2017-1 |
| Model | TB-479042 |
| Warranty | 3 months |
More information #ad
8. Geekworm
#adRaspberry Pi 4 Heatsink Case Compatible with Raspberry Pi 4B, Raspberry Pi 4 Model B CNC Ultra-Thin Aluminum Alloy Metal Passive Cooling Case, Pi 4B, Pi 4 Only N300, Geekworm Raspberry Pi 4 Case
#adWifi descriptionwith black acrylic translucent plate to maximize compatibility with WiFi and Bluetooth signals, almost no weakness for WiFi and Bluetooth signals. Ultra-thin designultra-thin with ONLY 16mm thickness raspberry pi 4 aluminum cnc case.
More information #ad
Model: N300 Good heat dissipationadd 5mm thick spin heat sink at the bottom to enhance the case heat dissipation and protect Raspberry Pi 4B from overheating. User manualrefer to geekworm wiki search n300; installation video refer to wiKi. For raspberry pi 4 psu: recommend to use geekworm UL listed 5V 4A Type-C power adapter ASIN:B09J856PND.| Brand | Geekworm #ad |
| Manufacturer | Geekworm #ad |
| Height | 0 Inches |
| Length | 0 Inches |
| Weight | 0.24 Pounds |
| Width | 0 Inches |
| Part Number | TB-2019-36 |
| Warranty | 3 months |
More information #ad
9. Geekworm
#adAuto On & Safe Shutdown Function for Raspberry Pi 4B/3B+/3B, X728 V2.2 Max 5.1V 6A 18650 UPS & Power Management Board with AC Power Loss Detection, Geekworm Raspberry Pi UPS
#adImportant note√1. How to power & specificationspower supply via type-c socket : 5vdc ±5%, via dc power jack : 5vdc ±5%, ≥3a, ≥4a; ups output : 5.1v ±5% max 6a; ups charging current: 2.
More information #ad
3~3. 2a; terminal Battery Voltage : 4. 24v; recharge Threshold : 4. 1v. The x728 can also be used with the X825/X828/X829 2. 5" hdd/ssd shield and x857/x862/x872 MSATA/M. 2 ssd shield for safe data backup. Do not use 18650 battery with built-in protection circuit. 3. Please make sure the polarity of battery is "+" to "+" and "-" to "-" and match with the "+" "-" mark on battery holder!!! Applicationx728 reserves the 40-pin header to stack with other raspberry pi accessory boards for enhanced applications. User manual refer to geekworm wiki search x728; match metal case for x728, refer to x728-C1ASIN:B09Z6C64NN. Psu for x728, refer to asin: B09J856PND.
| Brand | Geekworm #ad |
| Manufacturer | Geekworm #ad |
| Height | 1.38 Inches |
| Length | 3.35 Inches |
| Weight | 0.13 Pounds |
| Width | 0 Inches |
| Part Number | TB-2019-71 |
| Model | X728 V2.2 |
| Warranty | 3 months |
More information #ad
10. Geekworm
#ad20W 5V 4A USB C Power Adapter Type C Fast Charger UL Listed Support Raspberry Pi 4 Model B/NASPi/DACPi/X-C1/X825/X735/X728/X708/X706/X703/X930, Geekworm Raspberry Pi 4 Power Supply
#adOutput: 5v 4a 20w. Packing list: 1x 5v 4a us Plug Type-C Power Supply. Cable length: 1. 2 m / 47. 24 inches;. Power supply functions: over voltage protection; Under voltage protection; Over temperature protection; Over current protection; Short circuit protection.
More information #ad
Also support naspi / x728 / x735 / 4gb / dacpi /x-c1/ x825 / 2gb / x708/ x706 / x703/x930 expansion board/Retroflag PiStation Case. Power input: 100-240v ac, 50-60hz, 08a max. Raspberry pi 4b power adapter with UL Listed Certification - UL Listed.| Brand | Geekworm #ad |
| Manufacturer | Geekworm #ad |
| Height | 2.56 Inches |
| Length | 2.87 Inches |
| Weight | 0.29 Pounds |
| Width | 1.61 Inches |
| Part Number | TB-2021-35 |
| Warranty | 3 months |
More information #ad
