Top 10 GPU Vertical Mount Bracket NZXT – Computer Cases

As an Amazon Associate I earn from qualifying purchases.

1. NZXT

#ad

CA-H510i-B1, Front I/O USB Type-C Port, Tempered Glass Side Panel, Compact ATX Mid-Tower PC Gaming Case, Integrated RGB Lighting, Black, NZXT H510i, Vertical GPU Mount

#ad
NZXT #ad - Smart device v2: includes a faster microprocessor for NZXT CAM-powered control of two RGB lighting channels and three fan channels that support either voltage regulated or PWM fans.

Vertical gpu mounting: show off your graphic card with a built-in mounting bracket for installing your GPU vertically PCIe riser card not included. Enhanced cable management: Our patented cable routing kit with pre-installed channels and straps makes wiring easy and intuitive. New features: front i/o usb type-c port, Vertical GPU Mount, tempered glass side panel with single screw installation, and upgraded Smart Device V2. Specs: max gpu clearance: 321-381mm, radiaor Support - Front: 280mm or Rear: 120mm.
BrandNZXT #ad
ManufacturerNZXT #ad
Height18.11 Inches
Length16.85 Inches
Weight15 Pounds
Width8.27 Inches
Part NumberCA-H510I-B1
ModelCA-H510I-B1
Warranty2 years

2. NZXT

#ad

Sturdy Steel Bracket, Black, GPU Holder, NZXT Vertical GPU Mounting Kit, AB-RH175-B1-175 mm PCIe 4.0x16 Riser Cable

#ad
NZXT #ad - Nzxt compatibility: the bracket and riser cable fit perfectly into NZXT H7 Series cases, allowing enough clearance for air and AIO cooling systems, and the ability to replace the standard horizontal mounting bracket. Pcie 4. 0 riser cable: utilizing pcie 4. 0, the riser cable facilitates the high-speed bi-directional transfer of data from the video card to the motherboard, and vice versa for better performance. Sturdy steel bracket: The thick steel bracket holds even heavy graphics cards vertically and prevents them from sagging.
BrandNZXT #ad
ManufacturerNZXT #ad
Part NumberAB-RH175-B1
ModelAB-RH175-B1
Warranty2 Years

3. PHANTEKS THERMAL SOLUTIONS

#ad

220mm Flat Line PCI-E Gen4 x16 Riser Cable Kit, Phanteks PH-VGPUKT4.0_03 Gen4 Vertical GPU Bracket

#ad
PHANTEKS THERMAL SOLUTIONS #ad - Compatible with 1-slot, 2-slot, 3-slot and 4-slot graphics cards. Can be directly installed without modding in the Phanteks Eclipse P300A/P360A/P400A chassis. Premium and durable cable design supporting full Gen4 speeds. Rubber pads included to support graphics card weight to prevent GPU sag. Vertical mounting system for any graphics card. Pci-e gen4 x16 riser cable included with Dual layer induvial shielded cables. 7 pci slot atx chassis required.
BrandPHANTEKS THERMAL SOLUTIONS #ad
ManufacturerPhanteks #ad
Part NumberPH-VGPUKT4.0_03
ModelPH-VGPUKT4.0_03
Warranty1 year manufacturer

4. EZDIY-FAB

#ad

EZDIY-FAB Vertical PCIe 4.0 GPU Mount Bracket Graphic Card Holder, Video Card VGA Support Kit with PCIe 4.0 X16 Gen4 17cm/6.69in Riser Cable 90 Degree Right Angle- Black

#ad
EZDIY-FAB #ad - Supports pcie 4. 0/3. 0/2. 0/1. 0, rx6900xt, rtx3080, compatible with rtx3090, rtx3070, RTX3060TI, RX6800. Please test the riser cable onto the gpu first before installing the GPU to vertical bracket mount.

Please refer to length spec image and confirm that there is enough space of your chassis. Beautiful metal surface treatment, installed in the chassis to form a beautiful landscape. High quality material increases structural toughness and supports the large graphics card weight on the market. Thanks to stretchable structure design, dp cable to your GPU without hassle, you would be able to connect HDMI, compatible to PC chassis with PCI grilles. Supports most 1, 2, and 3 slot graphic cards. New designed bracket to vertically show off gpu. Designed for most full/mid ATX tower with at least 7 available PCI slots.
BrandEZDIY-FAB #ad
ManufacturerEZDIY-FAB #ad
Part NumberYIHPI333
ModelSG-4.0CM GPU-B

5. EZDIY-FAB

#ad

EZDIY-FAB Vertical Graphics Card Holder Bracket Support with Multi-Angle,GPU Mount,Video Card VGA Support Kit with PCIE3.0 Riser Cable- Black

#ad
EZDIY-FAB #ad - For long or heavier graphics cards, please adjust to an appropriate angle to avoid falling. Only support PCIE3. 0 The latest riser cable connects the graphics card to the PCIe slot of the motherboard, a flexible TPE flat cable with a length of 200 mm.

Before buying, please confirm whether there is enough space inside the chassis to install. The adjustable gpu bracket allows to show off their GPUs and enhance cooling efficiency by mounting it vertically, or at an angle between 0 and 45 degrees, on the PSU shroud. The base bracket is equipped with a strong magnet, which can make the bracket stable on the PSU shroud.
BrandEZDIY-FAB #ad
ManufacturerEZDIY-FAB #ad
Part NumberJP-Muti-VGA stand-B with new riser
ModelJP-Muti-VGA stand-B with new riser

6. Cooler Master

#ad

Compatible with All Standard ATX Chassis MCA-U000R-KFVK01, Cooler Master Master Accessory Vertical Graphics Card Holder Kit Version 2 with Premium Riser Cable PCI-E 3.0 x16-165mm

#ad
Cooler Master #ad - Modular, instantly adjustable design: the position of the GPU can move back and forth to allow cables to pass through chassis with either closed or open PCI slots.

Compatible with all standard atx chassis: The newly revised vertical graphics card holder kit fits all standard ATX chassis with at least 7 available PCI slots. Durable, high quality materials: thick SGCC steel prevents the largest and heaviest GPUs from bending the GPU holder. Showcase your graphics card: the vertical graphics card holder Kit allows vertical installation of a GPU to better show off the visual design of the GPU and its cooler. Cooler master riser cable version 2 included: A high quality Cooler Master version 2 riser cable completes the vertical GPU holder package.
BrandCooler Master #ad
ManufacturerCoolermaster #ad
Height4.76 Inches
Length7.24 Inches
Weight1.26 Pounds
Width5.59 Inches
Part NumberMCA-U000R-KFVK01
ModelMCA-U000R-KFVK01
Warranty1 Year

7. EZDIY-FAB

#ad

White, EZDIY-FAB PCIe 4.0 GPU Mount Bracket Graphic Card Holder Multi-Angle Adjustment with 5V 3 Pin ARGB LED Module, Video Card VGA Support Kit with PCIe 4.0 X16 Gen4 17cm/6.69in Riser Cable

#ad
EZDIY-FAB #ad - The adjustable gpu bracket allows to show off their GPUs and enhance cooling efficiency by mounting it vertically, or at an angle between 0 and 45 degrees, on the PSU shroud or any metal plane. Feturing with gen4 riser cable, rtx3070, rx6900xt, compatible with rtx3090, supports pcie 4.

0/3. 0/2. 0/1. 0, rtx3060ti, rtx3080, rx6800. The base bracket is equipped with a strong magnet, which can make the bracket stable on the PSU shroud. Gpu bracket with argb led lighting effects, fusion:support m/b 3 pin argb header 5v, r, b, Please note : Not Support 4pin RGB header +12V, mystic, g, synchronizable argb lighting via motherboard AURA, d, G, 12 volts can destroy LED.

Supports most 1, and 3 slot graphic cards, 2, high quality metal material increases structural toughness and supports the large graphics card on the market. Please test the riser cable onto the gpu first before installing the GPU to vertical bracket mount. Please refer to length spec image and confirm that there is enough space of your chassis.
BrandEZDIY-FAB #ad
ManufacturerEZDIY-FAB #ad
Part NumberUS-RGB 4.0CM muti GPU-W
ModelJP-RGB 4.0CM muti GPU-W

8. Phanteks

#ad

Phanteks PH-VGPUKT_02 – Universal Vertical GPU Bracket with 220mm Flat Line Pci-E X16 Riser Cable Kit

#ad
Phanteks #ad - Supports PCIE3. 0/2. 0/1. 0 Vertically display a VGA Graphics card. Gpu support: Dual Slot GPU. Pci slot required: 7. Compatible with chassis with “open” PCI slot design. Must change pci-e slot setting in bios to gen3/pci-e 3. 0 before installing the GPU to work with Gen4 / PCI-E 4. 0 gpus. Easy installation, placing tray over all seven PCI slot spaces. Modding might be required. Material: Powder Coated Steel. Included 220mm riser cable. Compatible: 7+ open PCI slots.
BrandPhanteks #ad
ManufacturerPhanteks #ad
Height6.5 Inches
Length9.5 Inches
Weight0.95 pounds
Width6.5 Inches
Part NumberPH-VGPUKT_02
ModelPH-VGPUKT_02
Warranty2 year manufacturer

9. EZDIY-FAB

#ad

EZDIY-FAB Vertical Graphics Card Holder Bracket with ARGB 5V 3Pin LED,GPU Mount,Video Card VGA Support Kit with PCIE3.0 Riser Cable- Black

#ad
EZDIY-FAB #ad - Only supports PCIE 3. 0 Designed for most atx case with at least 7 PCIE slots in the market. The 20cm/7. 8in pcie riser with high quality tpe cable and sectional design allows air ventilation and lowers working temperatures for better overall system performance.

Vertical gpu bracket with rgb led effects, g, fusion:support m/b 3 pin rgb header 5v, please note : Not Support 4pin RGB header +12V, B, synchronizable rgb lighting via motherboard aura, D, R, G, Mystic, 12 volts can destroy LED. Note: please check your case with enough space. With movable bracket, more flexible in using PC case interior space. Vertically display a gpu graphics card, Compatible with most brand's Graphic card, show off the visual design of the GPU and its cooler.
BrandEZDIY-FAB #ad
ManufacturerEZDIY-FAB #ad
Part NumberUS-3528 RGB GPU Bracket-B-with new riser
ModelUS-3528 RGB GPU Bracket-B-with new riser

10. EZDIY-FAB

#ad

White, EZDIY-FAB PCIe 4.0 GPU Mount Bracket Graphic Card Holder Multi-Angle Adjustment, Video Card VGA Support Kit with PCIe 4.0 X16 Gen4 17cm/6.69in Riser Cable

#ad
EZDIY-FAB #ad - Supports most 1, 2, and 3 slot graphic cards, high quality metal material increases structural toughness and supports the large graphics card on the market. Please test the riser cable onto the gpu first before installing the GPU to vertical bracket mount.

Please refer to length spec image and confirm that there is enough space of your chassis. The adjustable gpu bracket allows to show off their GPUs and enhance cooling efficiency by mounting it vertically, or at an angle between 0 and 45 degrees, on the PSU shroud or any metal plane. The base bracket is equipped with a strong magnet, which can make the bracket stable on the PSU shroud. Feturing with gen4 riser cable, supports pcie 4. 0/3. 0/2. 0/1. 0, rx6900xt, rtx3060ti, compatible with rtx3090, rtx3080, rtx3070, RX6800.
BrandEZDIY-FAB #ad
ManufacturerEZDIY-FAB #ad
Part NumberYIHPI333-3