1. Allo
#ad
Boss DAC
#adAllo #ad - Audio output connectors: 2 x RCA Left & Right & Allo Volt Amp header. Dedicated 384 khz/32bit high-quality DAC PCM5122 for best sound quality. Compatible with RPI2 and RPI3.More information #ad
Compatible with osmc / moode / picoreplayer / Max2Play / RuneAudio / PiMusicBox / volumio / OpenELEC and others + Roon Ready. Boss is a master dac master DACs are compatible only with RPI.Brand | Allo #ad |
Manufacturer | Allo #ad |
Height | 0.87 Inches |
Length | 2.65 Inches |
Weight | 0.06 Pounds |
Width | 2.56 Inches |
Part Number | C1021 |
Model | C1021 |
More information #ad
2. SainSmart
#ad
SainSmart HiFi DAC Audio Sound Card Module I2S Interface for Raspberry pi B+ 2
#adSainSmart #ad - Supports raspberry pi B+, Raspberry Pi 2 Model B. Sampling frequency:384KHz. Resolution Bits :16-32. Snr:120db; thd:-93db; dynamic range :112dB. Digital audio Interface :I2S.More information #ad
Brand | SainSmart #ad |
Manufacturer | SainSmart #ad |
Height | 1.6 Inches |
Length | 5.5 Inches |
Weight | 0.05 Pounds |
Width | 4.5 Inches |
Part Number | 13801 |
Model | 13801 |
More information #ad
3. HiFiBerry
#ad
HiFiBerry DAC+ – Pro
#adHiFiBerry #ad - It can be simply plugged onto your Raspberry Pi Model A+, B+ or 2B, it does not need any soldering. Note that this model is not compatible with older Raspberry Pi model A and B units! Connects directly to the Raspberry Pi, no additional cables needed.More information #ad
Skill level: Assembled and Tested. This is our hifiberry daC+-Pro with a pair of RCA jacks.Brand | HiFiBerry #ad |
Manufacturer | HiFiBerry #ad |
Height | 0.39 Inches |
Length | 2.17 Inches |
Weight | 0.04 Pounds |
Width | 2.56 Inches |
Part Number | DACPLUS-Pro |
Model | 6009 |
More information #ad
4. ILS.
#ad
ILS, DAC Sabre ES9023 Analog I2S 24 Bit 192 KHz Decoder Board for Raspberry Pi
#adILS. #ad - Sampling rates supported: 16 / 24 bit 192KHz. Input: I2S. Package included: 1 x ES9023 Decoder Board. Rca distance: 20mm spacing: 40 * 32mm PCB Size: 50 * 42mm. Output: RCA.More information #ad
Brand | ILS. #ad |
Manufacturer | I LOVE SHOPPING #ad |
Height | 0.39 Inches |
Length | 0.39 Inches |
Weight | 0.04 Pounds |
Width | 0.39 Inches |
Part Number | 1256341 |
More information #ad
5. innomaker
#ad
Innomaker Raspberry Pi HiFi DAC HAT PCM5122 HiFi DAC Audio Card Expansion Board for Raspberry Pi 4 3 B+ Pi Zero etc. DAC HAT
#adinnomaker #ad - Provides 2. 1vrms ground-centered outputs coupled with Film capacitor. Support dsd over PCMDOP mode. Class-leading stereo audio dac pcm5122, sample rates up to 384-khz/32-Bit. The hifi dac hat compatible with raspberry pi 4, zero w, 3b, 3b+ with the 40-pin connector.Support playing music from a hard disk or over the network. Absolutely perfect to support all raspberry pi music playback system, Debian, max2play, RuneAudio, PiCorePlayer, volumio, like OSMC, OpenELEC, PiMusicBox, Moode, Ubuntu etc.
More information #ad
Connects directly to the Raspberry Pi board, no additional cables required, Zero, no soldering. On-board a pair of gold plated rca left &right jacks and a 3. 5mm high-end headphone jack output, allow you free to play your music through Raspberry Pi to another terminals. Easy to get more beautiful and fantastic sound by this RPI+DAC HiFi suits. Paired with stereo high fidelity headphone amplifier TPA6133. For more information, please refer to our wiki(view the link on color page comes with the goods. Comes with software, document and friendly technology support.
Brand | innomaker #ad |
Manufacturer | innomaker #ad |
Part Number | RPI-HIFI |
Model | NA |
More information #ad
6. RASPIAUDIO.COM
#ad
Audio DAC HAT Sound Card Audio+ for Raspberry Pi Zero / PI3 / PI3B / PI3B+ / PI2 / Better Quality Than USB
#adRASPIAUDIO.COM #ad - Dac i2s 24-bit audio with studio sampling quality. Compatible with raspberry pi zero / PI3B / PI3 / PI3B+ / Pi 2. Free rca connector included +25 pins GPIOs connector for your projects. Line out stereo 3. 5mm jack for stereo input. Software volume control.More information #ad
Brand | RASPIAUDIO.COM #ad |
Manufacturer | RASPIAUDIO.COM #ad |
Height | 0.39 Inches |
Length | 2.56 Inches |
Weight | 0.02 Pounds |
Width | 1.18 Inches |
Part Number | DAC |
Model | AUDIO+ |
More information #ad
7. LANDZO
#ad
Raspberry Pi HiFi DAC HAT PCM5122 HiFi DAC Audio Card Expansion Board for Raspberry Pi 4 3 B+ Pi Zero W
#adLANDZO #ad - On-board a pair of gold plated rca left &right jacks and a 3. 5mm high-end headphone jack output, allow you free to play your music through Raspberry Pi to another terminals. Comes with software, document and friendly technology support.Support playing music from a hard disk or over the network. Support dsd over PCMDOP mode. Easy to get more beautiful and fantastic sound by this RPI+DAC HiFi suits. Paired with stereo high fidelity headphone amplifier TPA6133.
More information #ad
Support all raspberry pi music playback system, PiCorePlayer, Volumio, RuneAudio, pimusicbox, moode, debian, openelec, Max2Play, like OSMC, Ubuntu etc. The hifi dac hat compatible with raspberry pi 4, zero, 3b+ with the 40-pin connector. Class-leading stereo audio dac pcm5122, sample rates up to 384-khz/32-Bit. Connects directly to the raspberry Pi board, Zero W, 3B, no additional cables required, no soldering. Provides 2. 1vrms ground-centered outputs coupled with Film capacitor. For more information, please refer to our wiki(view the link on color page comes with the goods.
Brand | LANDZO #ad |
Manufacturer | LANDZO #ad |
Part Number | LANDZO |
More information #ad
8. FiiO
#ad
192kHz/24bit Optical and Coaxial DAC, FiiO D3 D03K Digital to Analog Audio Converter
#adFiiO #ad - Digital signal Optical Input Port. Digital To Analog Converter. Supports PCM only. Coaxial/optical switch For Easy Switching Between Digital Signals. Digital signal Coaxial Input Port. 3. 5mm sound output Dock.More information #ad
Brand | FiiO #ad |
Manufacturer | Fiio #ad |
Height | 1.93 Inches |
Length | 2.44 Inches |
Weight | 0.11 Pounds |
Width | 0.83 Inches |
Part Number | D03K |
Model | D03K |
More information #ad
9. Fosi Audio
#ad
Hi-Fi Digital-to-Analog Converter, Fosi Audio Q7, AK4118 Coaxial/Optical 24Bit/192kHz OP275 Amp Chip PCM2706 USB 16Bit/48kHz, Audio DAC Bluetooth 5.0 Decoder AK4493EQ I2S QCC3003 Low Latency
#adFosi Audio #ad - Bluetooth 5. 0 wireless audio built with high-end qualcomm QCC3003 5. 0 chip for achieving enhanced technology, leading to a quicker transmission and more stable connection with 49ft15M wide range.Efficient combination high performance desktop dac with Bluetooth, USB, optical and coaxial input to RCA line out. Advanced akm ak4493eq ak4493 adopt a new generation premium VELVET SOUNDTM technology make DAC works better with your audio.
More information #ad
Excellent op275-amp this new front end design combines both bipolar and JFET transistors to attain amplifiers with the accuracy and low noise performance of bipolar transistors, and the speed and sound quality of JFETs. Dac decoding supports highest 192kHz / 24Bit. Desktop dac designed for hi-fi sound all aluminium alloy shell to keep the purity of the sound, exclusively designed for the HiFi Audiophile, gold plated PCB, THD+N is as low as -113dB 0.0002%.
Brand | Fosi Audio #ad |
Manufacturer | Fosi Audio #ad |
Part Number | Q7 |
More information #ad
10. Sabaj
#ad
Sabaj D5 110V Hi-Res Audio Digital to Analog Converter Balance HiFi Headphones Amplifier DAC Chip ES9038PRO ES9311 32bit/768kHz DSD512 w Preamplifier Remote Control
#adSabaj #ad - Ultra-low phase noise ndk japan crystal oscillator and high-speed CPLD is used for clock processing, to achieve very low Clock jitter. The top performance d/a chip es9038pro from ess technology. And high-performance power supply chip es9311, the noise of ES9311 is lower than 1uVrms, to pushed ES9038PRO to the limit.All inputs support DSD streaming, including coaxial and optical DoP64. Special design of discrete components high current headphones amplifier for higher damping factor.
More information #ad
Built-in high efficiency and low vibration transformer provides sufficient and low noise power supply. Xmos xu-208, true 32bit audio processing, support DoP and Native DSD, and reaches 32bit/768kHz and DSD512. This d5 with 110v voltage, please adjust it to 220V if you will use it in 220V Countries! You can set the voltage selector which covered by label. Special design of discrete components linear regulator for analog circuit. 4 high-end dual op-amps OPA1612 and a lot of audio grade components are used. Jas hi-res certification.
Brand | Sabaj #ad |
Manufacturer | SHENZHEN DAHAO Technology Co., ltd #ad |
Weight | 7.72 Pounds |
Part Number | D5 |
Model | . |
More information #ad