As an Amazon Associate I earn from qualifying purchases.
MAGICRIG #ad - It consists of a cage with a nato handle and a t5 card holder. Securely locked by 1/4'' screws on the top and bottom, with additional locating pins and rubber pads on the base plate to prevent twisting. This handle is equipped with the hole pattern for ARRI accessory mount pins, you can attach compatible extension blocks, also provides 1/4" & 3/8" mounting points for additional accessories.
The handles are easy to transport and offer more convenience for low angle shooting. T5 ssd card holder.
Multiple mounting interfaces. Two m5 knob screws are used to lock the t5 ssd and its usb-C cable. This cage of anti-twisting and excellent heat dissipation for better shooting without making any damage to your valuable camera. Not for 6k pro! perfectly compatible - form-fitting design with unobstructed battery & SD card access. The mount can be mounted on the camera mount with two M4 screws or Two 1/4" screws.
MAGICRIG #ad - Fits blackmagic pocket camera 4k camera 6K Version. This cage of anti-twisting and excellent heat dissipation for better shooting without making any damage to your valuable camera. It consists of a cage and a top handle.
Multiple mounting interfaces. You can also attach a microphone or flash through the cage and the cold shoe on top of the handle. Multiple uses - this cage features a built-in nato rail on the top and left and right sides, allowing you to quickly release accessories with NATO fixtures, or install a NATO handle for handheld shooting, perfect for single or dual Handheld.
The cage is equipped with multiple 1/4'' and 3/8'' screw holes that can be used to install monitors, microphones, flash and other accessories. Perfectly compatible - form-fitting design with unobstructed battery & SD card access. Securely locked by 1/4'' screws on the top and bottom, with additional locating pins and rubber pads on the base plate to prevent twisting.
MAGICRIG #ad - Perfectly compatible - form-fitting design with unobstructed battery & SD card access. Securely locked by 1/4'' screws on the top and bottom, with additional locating pins and rubber pads on the base plate to prevent twisting.
Two m5 knob screws are used to lock the t5 ssd and its usb-c cable. It consists of a cage with a top handle and a t5 ssd holder. Magicrig cage kit for blackmagic design pocket cinema Camera 4K & 6K. There are a variety of mounting options to give you more options.
The mount can be mounted on the camera mount with two M4 screws or Two 1/4" screws. T5 ssd holder. This top handle equipped with built-in shoe mount for microphone and LED lights also provides 1/4" & 3/8" mounting points for additional accessories. This cage of anti-twisting and excellent heat dissipation for better shooting without making any damage to your valuable camera.
MAGICRIG #ad - And allen key included in the package to tighten the screw. High qualitythe cable clamp is made of aluminium alloy, sturdy and durable.
Knurled screweach knurled screw adjusts a stop, which can be tightened to accommodate different cable diameters. The cable clamp prevents the camera's HDMI and USB-C cables from being accidentally disconnected.
MAGICRIG #ad - Allow you to mount more accessories. Multi-protection design: the top and bottom are firmly locked with 1/4" screws, and there are additional positioning pins and rubber pads on the bottom plate to prevent twisting and scratching. This bracket comes with a detachable cold shoe, so you can install the SSD on the cold shoe mount, or remove the cold shoe, you can use 1/4" screws to install the bracket.
Nato top handle: installed on the cage for nato rail standard. The top of the handle has built-in 3 cold shoe and an Arri locating hole, monitor, flash, allow to mount microphone, etc.
T5 ssd mount : it's fixed on the cage via cold shoe to fix the t5 ssd and protect the USB-C cable. Multiple mounting interfaces. The cage is equipped with multiple 1/4'' and 3/8'' screw holes. Built-in nato rail on the top and left and right sides. Full-cage design: fits the new blackmagic pocket camera 4K /6K Version. This camera cage kit contains a cage, a NATO top handle and a T5 SSD mount. Built-in a cold shoe on the top of the cage.
MAGICRIG #ad - Multi-protection design: the top and bottom are firmly locked with 1/4" screws, and there are additional positioning pins and rubber pads on the bottom plate to prevent twisting and scratching. Allow you to mount more accessories.
The handle could be locked tight via the knurled knob manually. Built-in a cold shoe on the top of the cage. Form-fitting design: the cage fits the camera very well, expansion ports, LED screens, interfaces, and battery compartments, card slots, and will not affect your access to buttons, providing a comfortable photography experience.
Built-in nato rail on the top and left and right sides. The top of the handle has built-in 3 cold shoe and an Arri locating hole, monitor, allow to mount microphone, flash, etc. Nato top handle: installed on the cage for nato rail standard. Full-cage design: fits the new blackmagic pocket Camera 4K /6K Version. This camera cage kit contains a cage and a NATO top handle.
MAGICRIG #ad - Form-fitting designfits the new blackmagic pocket camera 4K /6K Version. All buttons on the camera are barrier-free to ensure easy access to camera controls. Rotating nato handle nato handle has the function of quick loading and unloading.
The handle can be used as a top handle and a side handle. Double lock design securely locked by 1/4" screws on the top and bottom, and with additional positioning pins and rubber pads on the base plate to prevent distortion.
The battery and SD card are also unimpeded. Built-in hexagon wrench, easy to access. It can be rotated 360 degrees to find the balance position/comfortable holding position of the device. Multiple mounting interfaces designthe cage is equipped with multiple 1/4'' and 3/8'' screw holes. Built-in Cold Shoe mount. That can be used to install monitors, microphones, flash and other accessories.
MAGICRIG #ad - Multiple mounting interfaces. The cage is equipped with multiple 1/4'' and 3/8'' screw holes. Built-in nato rail on the top and left and right sides. The handle can be adjusted back and forth to provide a comfortable grip. Nato top handle gripthe top of the handle has built-in 2 cold shoe and an Arri locating hole, allow to mount microphone, flash, monitor, etc.
Only for bmpcc 4k / 6kexclusive for the new blackmagic pocket camera 4k /6k version. The camera cage kit contains a cage, a HDMI cable clamp and a 15MM rod clamp. Built-in a cold shoe on the top of the cage. Hdmi cable clampthe hdmi cable clamp protects the hdmi cable from being impaired or damaged, keeps the signal stable.
In addition, comes with a standard cold shoe adapter, which is convenient for you to install the SSD on the cold shoe mount of the camera cage. Allow access all the buttons, battery, a NATO top handle, no block LED screen, card slots, a SSD holder, expansion ports. Allow you to mount more accessories. In addition, the top and bottom are locked camera with 1/4" screws, there are additional locating pins and rubber pads on the bottom plate to prevent twisting and scratching.
MAGICRIG #ad - T5 holder compact design perfectly matches with t5 ssd. Rubber padthere are rubber pad on the knurled knob to increase friction to prevent distortion. Dedicated to the installation of t5 ssd, compatible with MAGICRIG Cage for BMPCC 4K /6K /6K Pro.
SMALLRIG #ad - Mount for samsung t5 ssdthe ssd holder is fixed to the cage by two screws, securing the T5 SSD and protecting the USB-C cable. The cage kit features a built-in Nato rail that allows you to quickly release accessories with NATO clamp. The handle attaches directly to the cage’s NATO rail on the top and is adjustable fore and aft.
The basic handheld kit for blackmagic Camera from SmallRig provides an ideal production tool for the BMPCC 4K & 6K. Top recommendationwhen working with the camera field monitors, you could fix it to the top of cage kit 2419 with SMALLRIG Monitor Mount 1842.
This is a basic and light handheld kit for BMPCC 4K & 6K users. Original designsmallrig cage kit for blackmagic design pocket cinema camera 4k & 6k includes an integrated full cage, a top handle, and an SSD holder. Mounting pointssmallrig 2419 features multiple mounting points including nato rail, locating holes for arri, 1/4"-20 & 3/8"-16 holes, and Cold Shoe Mount.
1. MAGICRIG
#adMAGICRIG BMPCC 4K /6K Cage with NATO Handle + T5 SSD Card Mount Clamp for Blackmagic Pocket Cinema Camera BMPCC 4K /6K
#adThe handles are easy to transport and offer more convenience for low angle shooting. T5 ssd card holder.
More information #ad
The cage is equipped with multiple 1/4'' and 3/8'' screw holes that can be used to install monitors, microphones, flash and other accessories. Magicrig cage kit for blackmagic design pocket cinema camera 4K & 6K. There are a variety of mounting options to give you more options. Multiple mounting interfaces. Two m5 knob screws are used to lock the t5 ssd and its usb-C cable. This cage of anti-twisting and excellent heat dissipation for better shooting without making any damage to your valuable camera. Not for 6k pro! perfectly compatible - form-fitting design with unobstructed battery & SD card access. The mount can be mounted on the camera mount with two M4 screws or Two 1/4" screws.
| Brand | MAGICRIG #ad |
| Manufacturer | Smpuvte #ad |
| Height | 4.53 Inches |
| Length | 7.6 Inches |
| Weight | 1.28 Pounds |
| Width | 2.95 Inches |
| Part Number | SM-529 |
More information #ad
2. MAGICRIG
#adMAGICRIG BMPCC 4K /BMPCC 6K Cage with Top Handle for Blackmagic Pocket Cinema Camera BMPCC 4K /6K to Mount Microphone Monitor LED Light
#adMultiple mounting interfaces. You can also attach a microphone or flash through the cage and the cold shoe on top of the handle. Multiple uses - this cage features a built-in nato rail on the top and left and right sides, allowing you to quickly release accessories with NATO fixtures, or install a NATO handle for handheld shooting, perfect for single or dual Handheld.
More information #ad
The cage is equipped with multiple 1/4'' and 3/8'' screw holes that can be used to install monitors, microphones, flash and other accessories. Perfectly compatible - form-fitting design with unobstructed battery & SD card access. Securely locked by 1/4'' screws on the top and bottom, with additional locating pins and rubber pads on the base plate to prevent twisting.
| Brand | MAGICRIG #ad |
| Manufacturer | Smpuvte #ad |
| Height | 4.53 Inches |
| Length | 7.6 Inches |
| Weight | 1.06 Pounds |
| Width | 2.95 Inches |
| Part Number | SM-522 |
More information #ad
3. MAGICRIG
#adMAGICRIG BMPCC 4K / BMPCC 6K Camera Cage Kit for Blackmagic Design Pocket Cinema Camera 4K / 6K
#adTwo m5 knob screws are used to lock the t5 ssd and its usb-c cable. It consists of a cage with a top handle and a t5 ssd holder. Magicrig cage kit for blackmagic design pocket cinema Camera 4K & 6K. There are a variety of mounting options to give you more options.
More information #ad
Multiple mounting interfaces. This cage equipped with built-in cold shoes and multiple 1/4'' & 3/8'' screw holes that can be used to install monitors, microphones, flash and other accessories. The mount can be mounted on the camera mount with two M4 screws or Two 1/4" screws. T5 ssd holder. This top handle equipped with built-in shoe mount for microphone and LED lights also provides 1/4" & 3/8" mounting points for additional accessories. This cage of anti-twisting and excellent heat dissipation for better shooting without making any damage to your valuable camera.
| Brand | MAGICRIG #ad |
| Manufacturer | Smpuvte #ad |
| Height | 4.53 Inches |
| Length | 7.6 Inches |
| Weight | 1.26 Pounds |
| Width | 2.95 Inches |
| Part Number | SM-533 |
More information #ad
4. MAGICRIG
#adFor BMPCC 6K Pro Cage, MAGICRIG HDMI and USB-C Cable Clamp Compatible with BMPCC 4K & 6K Cage
#adKnurled screweach knurled screw adjusts a stop, which can be tightened to accommodate different cable diameters. The cable clamp prevents the camera's HDMI and USB-C cables from being accidentally disconnected.
More information #ad
Not for smallrig 4k & 6k cage!compatibilitythe cable clamp compatible with MAGICRIG BMPCC 4K & 6K Cage and BMPCC 6K Pro cage. Lockingsecures cable via knurled screws. Easy to installthe cable clamp attaches to the left side of the cage using 1/4" screw.| Brand | MAGICRIG #ad |
| Manufacturer | Smpuvte #ad |
| Height | 0.41 Inches |
| Length | 2.05 Inches |
| Weight | 0.08 Pounds |
| Width | 1.42 Inches |
| Part Number | SM-412 |
More information #ad
5. MAGICRIG
#adT5 SSD Mount Holder, MAGICRIG BMPCC 4K Camera Cage for BMPCC 4K & 6K, with Rubber Top Handle
#adNato top handle: installed on the cage for nato rail standard. The top of the handle has built-in 3 cold shoe and an Arri locating hole, monitor, flash, allow to mount microphone, etc.
More information #ad
Form-fitting design: the cage fits the camera very well, interfaces, LED screens, expansion ports, and will not affect your access to buttons, and battery compartments, card slots, providing a comfortable photography experience. T5 ssd mount : it's fixed on the cage via cold shoe to fix the t5 ssd and protect the USB-C cable. Multiple mounting interfaces. The cage is equipped with multiple 1/4'' and 3/8'' screw holes. Built-in nato rail on the top and left and right sides. Full-cage design: fits the new blackmagic pocket camera 4K /6K Version. This camera cage kit contains a cage, a NATO top handle and a T5 SSD mount. Built-in a cold shoe on the top of the cage.
| Brand | MAGICRIG #ad |
| Manufacturer | MAGICRIG #ad |
| Height | 4.53 Inches |
| Length | 7.6 Inches |
| Weight | 1.26 Pounds |
| Width | 2.95 Inches |
| Part Number | A00573 |
| Model | A00573 |
More information #ad
6. MAGICRIG
#adWith Rubber Top Handle ,for Blackmagic Pocket Cinema Camera BMPCC 4K & 6K, MAGICRIG Camera Cage Kit for BMPCC 4K/6K
#adThe handle could be locked tight via the knurled knob manually. Built-in a cold shoe on the top of the cage. Form-fitting design: the cage fits the camera very well, expansion ports, LED screens, interfaces, and battery compartments, card slots, and will not affect your access to buttons, providing a comfortable photography experience.
More information #ad
Multiple mounting interfaces. The cage is equipped with multiple 1/4'' and 3/8'' screw holes. Built-in nato rail on the top and left and right sides. The top of the handle has built-in 3 cold shoe and an Arri locating hole, monitor, allow to mount microphone, flash, etc. Nato top handle: installed on the cage for nato rail standard. Full-cage design: fits the new blackmagic pocket Camera 4K /6K Version. This camera cage kit contains a cage and a NATO top handle.
| Brand | MAGICRIG #ad |
| Manufacturer | MAGICRIG #ad |
| Height | 4.53 Inches |
| Length | 7.6 Inches |
| Weight | 0.95 Pounds |
| Width | 2.95 Inches |
| Part Number | A00572 |
| Model | A00572 |
More information #ad
7. MAGICRIG
#adMAGICRIG Camera Cage for BMPCC 4K /6K ,with Rotating NATO Top Handle for Blackmagic Design Pocket Cinema Camera 4K / 6K
#adThe handle can be used as a top handle and a side handle. Double lock design securely locked by 1/4" screws on the top and bottom, and with additional positioning pins and rubber pads on the base plate to prevent distortion.
More information #ad
Built-in nato railthis cage features a built-in NATO rail on the top, left and right sides where you can install a NATO handle for handheld shooting. The battery and SD card are also unimpeded. Built-in hexagon wrench, easy to access. It can be rotated 360 degrees to find the balance position/comfortable holding position of the device. Multiple mounting interfaces designthe cage is equipped with multiple 1/4'' and 3/8'' screw holes. Built-in Cold Shoe mount. That can be used to install monitors, microphones, flash and other accessories.
| Brand | MAGICRIG #ad |
| Manufacturer | MAGICRIG #ad |
| Height | 4.53 Inches |
| Length | 7.6 Inches |
| Weight | 1.05 Pounds |
| Width | 2.95 Inches |
| Part Number | A00536 |
| Model | A00536 |
More information #ad
8. MAGICRIG
#adMAGICRIG Camera Cage Kit for BMPCC 4K / 6K,for Blackmagic Pocket Cinema Camera 4K & 6K,with NATO Handle,SSD Mount Holder,HDMI Cable Clamp
#adOnly for bmpcc 4k / 6kexclusive for the new blackmagic pocket camera 4k /6k version. The camera cage kit contains a cage, a HDMI cable clamp and a 15MM rod clamp. Built-in a cold shoe on the top of the cage. Hdmi cable clampthe hdmi cable clamp protects the hdmi cable from being impaired or damaged, keeps the signal stable.
More information #ad
It is fixed on the camera cage with 1/4"-20 screws. And, the bottom of the cable clamp is equipped with rubber gasket to protect the camera cage from scratches. T5/t7 ssd mount holderthe ssd card clamp dedicated to the installation of samsung t5/t7 ssd, compatible with SanDisk SSD, for Bmpcc 4K /6K/6K PRO camera. In addition, comes with a standard cold shoe adapter, which is convenient for you to install the SSD on the cold shoe mount of the camera cage. Allow access all the buttons, battery, a NATO top handle, no block LED screen, card slots, a SSD holder, expansion ports. Allow you to mount more accessories. In addition, the top and bottom are locked camera with 1/4" screws, there are additional locating pins and rubber pads on the bottom plate to prevent twisting and scratching.
| Brand | MAGICRIG #ad |
| Manufacturer | MAGICRIG #ad |
| Height | 4.53 Inches |
| Length | 7.6 Inches |
| Width | 2.95 Inches |
| Part Number | B00529-U |
| Model | B00529-U |
More information #ad
9. MAGICRIG
#adMAGICRIG T5 SSD Mount Bracket with USB-C Cable Clamp and Cold Shoe Mount for BMPCC 4K & 6K Cage
#adMore information #ad
Also, the rubber pad can protect the rig from scratches. Installationthere are a variety of installation methods for the mount, giving you more choices. The mount can be mounted to the camera cage via a cold shoe mount or two 1/4" screws.| Brand | MAGICRIG #ad |
| Manufacturer | Smpuvte #ad |
More information #ad
10. SMALLRIG
#adUpdated SMALLRIG Camera Cage Kit for Blackmagic Design Pocket Cinema Camera 4K & 6K, Compatible with BMPCC 4K & 6K, KCVB2419
#adThe basic handheld kit for blackmagic Camera from SmallRig provides an ideal production tool for the BMPCC 4K & 6K. Top recommendationwhen working with the camera field monitors, you could fix it to the top of cage kit 2419 with SMALLRIG Monitor Mount 1842.
More information #ad
For handheld shootingthis top handle from smallrig features a shoe mount for microphone and led lights, is designed for handheld shooting, can hold the weight of a large cage rig with various attachments with ease. The cage rig for bmpcc 4k & 6k is locked by 1/4”- 20 screws on both the top and bottom, with additional locating pins and rubber pads on the base plate preventing wiggles or scratches. This is a basic and light handheld kit for BMPCC 4K & 6K users. Original designsmallrig cage kit for blackmagic design pocket cinema camera 4k & 6k includes an integrated full cage, a top handle, and an SSD holder. Mounting pointssmallrig 2419 features multiple mounting points including nato rail, locating holes for arri, 1/4"-20 & 3/8"-16 holes, and Cold Shoe Mount.
| Brand | SMALLRIG #ad |
| Manufacturer | SMALLRIG #ad |
| Height | 6.91 Inches |
| Length | 8.35 Inches |
| Weight | 1.1 Pounds |
| Width | 4.65 Inches |
| Part Number | KCVB2419-SR |
More information #ad
