Top 10 NATO Monitor Mount – Camera Mounts & Clamps

As an Amazon Associate I earn from qualifying purchases.



SMALLRIG Field Monitor Mount Monitor Holder Swivel and Tilt Adjustable with NATO Clamp Mount for 5" and 7" Monitor, 2906

SMALLRIG #ad - Besides, it includes an Allen wrench for tightening the mounts for further secure. Swivels 360° & tilts 170° the holder 2906 enables to swivel 360° sideways and tilts 170° with a free stop in any position. Tightness adjustable the tightness of each axis is adjustable via the allen wrench.

For 5" or 7" onboard monitorsmallrig swivel and tilt adjustable monitor mount with nato clamp mount 2906 is designed to hold your monitor onto the camera cage or other mounting system via NATO clamp. It can effectively prevent twist and don't need to worry about the monitor fall off. High qualitythe robust mount is cnc-machined aluminum and can support 5" and 7" monitor up to 1. 5kg 3. 3 lb, which makes it lightweight and durable at the same time.

Note: please do use the Allen Wrench to re-tighten the thumbscrew for further secure. It enable you to position your monitor at the best viewing angle. The thumbscrew features holes for hex spanner to ensure your monitor safe. Rubber paddingthe swivel and tilt mount has protective rubber padding on top, which can increase the friction and protects the monitor from scratching. It features 1/4"-20 screw on the top for monitor, light, or microphone.
ManufacturerSMALLRIG #ad
Height1.65 Inches
Length1.42 Inches
Width1.82 Inches
Part Number2906-SR



SMALLRIG Adjustable Camera Monitor Mount with NATO Clamp for DJI RS 2 / RSC 2-3026

SMALLRIG #ad - Firm lockingthe monitor mount can be installed on two sides of the stabilizer by quick release NATO clamp and features an anti-removal stud to protect your devices from falling. This mount is designed for adding accessories on both sides of the stabilizer, light, such as monitor, wireless device, sound receiver, action camera, etc.

With its compact structure and consistent design to match RS 2, it is a perfect match with the stabilizer. Please note: the max payload is 1. 5kg. On top and bottom of it, light, microphone, etc. High customizationmatte surface perfectly matches with the industrial design of stabilizer. Multiple mounting optionsthere are two 1/4"-20 threaded holes on top of the monitor mount, there is one cold shoe mount which can be attached with a sound receiver, and one 1/4 threaded hole on side of it, which can be attached with Magic Arm 2163 for action camera or other rigs.1

165° tilt rangesmallrig 3026 is adjustable for 165° and can be stopped at any angle without tools. For dji rs 2/rsc 2smallrig monitor mount 3026 is specially designed for dji rs 2/rSC 2 gimbal.
ManufacturerSMALLRIG #ad
Height2.07 Inches
Length5.28 Inches
Width1.65 Inches
Part Number3026-SR



SMALLRIG Field Monitor Holder Mount with Quick Release NATO Clamp for 5 inch and 7 inch Monitor, Swivel and Tilt, 2347

SMALLRIG #ad - Swivel and tiltthe field monitor holder enables to swivel 360° sideways and tilt 150° which allows to hold your monitor onto any position without using tools. The monitor mount is compatible with 5 inch or 7 inch monitor. And the max load of this monitor mount is 1.

2kg. It can effectively prevent twist and don't need to worry about the monitor fall off. It can be tightened by hands via the thumbscrew. High qualitythe robust mount is cnc-machined aluminum, which makes it lightweight and durable at the same time. For monitor mount please note: the item does not include the nato clamp. It enables the cameraman to have better monitoring as per the needs in different shooting scenarios. Both thumbscrews features holes for hex spanner to ensure your monitor safe.

Rubber cushionthis camera monitor holder comes with rubber cushions on top of the holder, which can increase the friction and protects the monitor from scratching. Smallrig monitor mount 2347 is designed to hold your monitor onto the top of the camera or other mounting systems via a nato clamp, which achieves lightweight design without any accessories. Firm lockingthe camera monitor mount connects with monitor firmly via a 1/4-20 screw on the bottom.
ManufacturerSMALLRIG #ad
Height1.42 Inches
Length1.81 Inches
Width1.93 Inches
Part NumberBSE2347-SR



2100, SMALLRIG Field Monitor Holder Mount with Quick Release NATO Clamp

SMALLRIG #ad - 160° rotation adjustmentrotation axis enables smallrig dslr monitor holder mount to adjust the position of monitor up to 160° with only one hand for better monitoring as per your needs at different directions during shooting. Special purposesmallrig dslr monitor holder mount 2100 allows an easy and fast adjustment of monitor viewing angle and enables the cameraman to have better monitoring as per the needs in different shooting scenarios.

Rubber cushion on the top is utilized to prevent the monitor from any scratches and damages. Quick release smallrig camera field monitor bracket can be secured with thumb screw or hex spanner through the tightening of the 1/4'' threaded screw on the top.

It could be locked tight with the red locking lever quickly. Quick release on any cage with nato rail, such as smallrig a6300 / a6500 Cage 1889 or SMALLRIG Safety Rail 1195. The ultra-compact structure features height of 46mm only. Please notethe maximum load of this item is 1. 5kg. Two m5 screws are applied for damping based on the weight of monitors. Structure this camera field monitor compatible with both 5'' and 7'' monitors.
ManufacturerSMALLRIG #ad
Height1.93 Inches
Length1.89 Inches
Weight0.18 Pounds
Width1.42 Inches
Part Number2100-SR

5. Nitze


Nitze Low Profile Monitor Holder Mount NATO Clamp to 1/4”-20 Screw, N54-F2

Nitze #ad - You can lock the nato rail through NATO clamp, which can help you connect more functional accessories. The holes on the thumbscrew support to be more tightened by using the attached hex spanner after rotating the thumbscrew to lock the monitor.

There is a rubber pad on the top of the monitor holder mount, which can effectively prevent friction and scratching with the monitor or monitor cage. Damping design can be adjusted by screwing and loosing the M4 screws. The monitor holder mount supports 180° tilt and 360° swivel with free stop. This new n54-f2 monitor holder mount has reduced volume and weight compared to the previous model, but its well-designed structure allows it to load up to 3 kg.
BrandNitze #ad
Manufacturershenzhenshi Xinyishengwujinyouxiangongsi #ad
Part NumberN54-F2



302, NICEYRIG DSLR Monitor Mount with NATO Rail Clamp, Quick Release Field Monitor Bracket for Camera, Cage Rig

NICEYRIG #ad - Niceyrig field monitor mount 302 could attach to NATO rail of your camera cage or other NATO rail accessories, quick release. Compact size, aluminum alloy sturdy mount.

Allows 360 degree swivel and up to 160 degree tilt so that you can freely adjust your clip-on LCD monitor or any other accessories in any position, excellent for the cameraman to have better monitoring. Quality rubber cushions on top of the mount holder can increase the friction, yet protect your devices from scratching. Make it by a hand, no need the supplied Allen hex drivers ! Quickly attach and detach via the white thumbscrew, 4. 4 lb maximum payload suitable for devices 5 inch 7 inch field monitor, flash light, mic, etc.
ManufacturerNICEYRIG #ad
Part NumberUSMONITOR302



SmallRig Swivel and Tilt Monitor Mount with NATO Clamp Both Sides BSE2385

SMALLRIG #ad - For vertical (90°) payload, it can hold accessories up to 2. 5kg. Multiple using angle: the holder enables to swivel 360° sideways and tilt 140° allows to hold your monitor onto any position without using tools. Dual nato clamp: each side ends with nato clamp to fit SMALLRIG monitor cage which features nato rail on the bottom. Strong and sturdy: it is cnc-machined aluminum and can support 5”and 7”monitor up to 1. 2kg. What you get: 1 x Monitor Mount. Unique design: smallrig bse2385 is specially designed to hold monitor onto any camera cage or mounting system features nato rail.
ManufacturerSmallRig #ad
Height1.18 Inches
Length1.75 Inches
Weight0.18 Pounds
Width1.96 Inches
Part NumberBSE2385-CF-FBA-US



SMALLRIG Quick Release EVF Mount Monitor Support with NATO Rail and NATO Clamp – 2113

SMALLRIG #ad - You could also mount a smallrig monitor Mount 2100 on this EVF mount to build a personalized rig. 360° rotationsmallrig evf mount 2113 is designed to hold a evf or a filed monitor in place.

Load capacitythe maximum load of this monitor holder is 1. 5kg. Related accessoriesusually, you could attach this evf mount to a nato rail like smallrig nato rail 1409 or a cage feature built-in NATO rail like SMALLRIG BMPCC Cage 4K Cage 2203. What you get 1 x evf holder, 2 x 1/4" Screw, 1 x m5 screw, 1 x Allen Wrench. It comes with a wingnut to adjust the damping of the monitor mount to adapt monitors of different weights.

The bracket part features a NATO rail. Then you could lock the NATO clamp with the red locking lever. You could rotate it 360 degrees to find the best viewing angle of your EVF/monitor. Quick releasewith the nato clamp on one end, you could attach to a NATO rail in seconds.
ManufacturerSMALLRIG #ad
Height4.33 Inches
Length2.64 Inches
Width1.85 Inches
Part Number2113-SR



2071B, SmallRig Articulating Magic Arm with Screw Ballhead and NATO Clamp Ballhead, Audio Recorders, Monitor Mount for Field Monitor, Lights, DIY Camera Rig

SMALLRIG #ad - Nato clamp ballhead: attach cage with nato rail with on the other end via ballhead with NATO clamp, while it could attach monitor cage on the other end via ballhead with 1/4’’ screw. What you get: 1 x ballhead with 1/4’’ screw; 1 x ballhead with NATO Clamp; 1 x Ballhead Clamp; 1 x Hex Spanner.

Quick release & adjust angle: it features quick release and attachment and could be slid to get the balance of the whole kit. The monitor mounted on it could be adjusted in different positions and angles via both the ballhead and ballhead clamp. Extensive compatibility: the ballhead with 1/4" screw thread can not only be connected to monitors, smallrig 2052, smallrig 2051, such as cage5" smallrig 1726, smallrig 2050, camera cages such as gh5 cage rigs SMALLRIG 2049, smallrig 2008, but also can be attached to monitor cages with NATO rail, SMALLRIG Cage for Ninja Assassin 1788, SMALLRIG Monitor Cage 1834 or other products with nato rail.

Precision locking device: a single wingnut is applied to lock the double ballhead tight directly, and thumb screws on both ends are utilized to lock the devices manually and a spared hex spanner is ready to lock it tighter.
ManufacturerSmallRig #ad
Height2.05 Inches
Length5.51 Inches
Weight0.33 Pounds
Width1.02 Inches
Part Number2071B-CF-FBA-US

10. UURig


UURig R058 Camera Field Monitor Mount with Slide 1/4" Mount, NATO Chute Lock, Quick Release Monitor Mount Compatible with Sony A7 III A7R III A6400 Camera Cage

UURig #ad - Anti-scratch gasket - the top is equipped with anti-scratch gaskets to increase the locking friction and protect the equipment from scratches. Chute lock - the chute locking design makes disassembly and assembly easier and faster. 170° arbitrary adjustment - the bracket can be moved back and forth, and the angle can be adjusted at will according to the shooting needs. Chute prevention design - Spring pins are designed on both sides of the chute to prevent accessories from falling off.
BrandUURig #ad
ManufacturerUURig #ad
Part NumberR058