As an Amazon Associate I earn from qualifying purchases.
1. SMALLRIG #ad
Monitor Mount for Field Monitor, DIY Camera Rig, 2071B, SmallRig Articulating Magic Arm with Screw Ballhead and NATO Clamp Ballhead, Audio Recorders, Lights #adSMALLRIG #ad
- Extensive compatibility: the ballhead with 1/4" screw thread can not only be connected to monitors, smallrig 2051, but also can be attached to monitor cages with nato rail, camera cages such as gh5 cage rigs SMALLRIG 2049, smallrig 2008, such as Cage5" SMALLRIG 1726, SMALLRIG 2052, SMALLRIG 2050, smallrig cage for Ninja Assassin 1788, SMALLRIG Monitor Cage 1834 or other products with nato rail.
Nato clamp ballhead: attach cage with nato rail with on the other end via ballhead with NATO clamp, while it could attach monitor cage on the other end via ballhead with 1/4’’ screw.
Quick release & adjust angle: it features quick release and attachment and could be slid to get the balance of the whole kit.
The monitor mounted on it could be adjusted in different positions and angles via both the ballhead and ballhead clamp. Precision locking device: a single wingnut is applied to lock the double ballhead tight directly, and thumb screws on both ends are utilized to lock the devices manually and a spared hex spanner is ready to lock it tighter. What you get: 1 x ballhead with 1/4’’ screw; 1 x ballhead with NATO Clamp; 1 x Ballhead Clamp; 1 x Hex Spanner.
2. SMALLRIG #ad
W/ 1/4” Thread 3/8” Locating Hole NATO Rail for Magic Arm Handle, 2214, SMALLRIG Monitor Mount Holder for DJI Ronin S & Ronin SC Gimbal Accessories Mounting Plate #adSMALLRIG #ad
- For dji ronin s & ronin sc: designed for dji ronins & ronin SC Handheld Gimbal. Installations: it is fixed on the side of gimbal for Ronin S &SC via two M4 screws after taking off the small plate for DJI which covers the electronic contacts.
Multiple mounting holes: 1/4”threads could be attached to other accessories like cold shoe, bracket.
3/8”holes for arri standard is attached to accessory with locating pins. Nato rail: comes with nato rail for the Nato Side Handle 1688/2187. It will not add the weight. It provides multiple mounting holes for accessories attachment such as monitor mount 2070 Light weight: weight only 009 lb 40g.
3. SMALLRIG #ad
SMALLRIG Quick Release EVF Mount Monitor Support with NATO Rail and NATO Clamp – 2113 #adSMALLRIG #ad
- It comes with a wingnut to adjust the damping of the monitor mount to adapt monitors of different weights. The bracket part features a NATO rail. You could also mount a smallrig monitor Mount 2100 on this EVF mount to build a personalized rig.
Related accessoriesusually, you could attach this evf mount to a nato rail like smallrig nato rail 1409 or a cage feature built-in NATO rail like SMALLRIG BMPCC Cage 4K Cage 2203.
Quick releasewith the nato clamp on one end, you could attach to a NATO rail in seconds. You could rotate it 360 degrees to find the best viewing angle of your EVF/monitor.
Load capacitythe maximum load of this monitor holder is 1. 5kg. Then you could lock the NATO clamp with the red locking lever. What you get 1 x evf holder, 2 x 1/4" Screw, 1 x m5 screw, 1 x Allen Wrench.360° rotationsmallrig evf mount 2113 is designed to hold a evf or a filed monitor in place.
4. SMALLRIG #ad
2172, SMALLRIG Mini Anti-Off Quick Release NATO Rail Thickness 6mm, Length 48mm for NATO Handle, Camera Cage #adSMALLRIG #ad
- Thin&lightweightthickness of 6mm, Length of 48mm, weighs only 10g. Other useit can be attached to any accessories with two 1/4-20 holes via two 1/4-20 screws included to provide a mount for QR handle, EVF mount, and camera plate, NATO clamp, etc.
Compatibilitycompatible with standard NATO clamp. Anti-off designsafety pins on each side preventing NATO clamp from sliding off. Recommendationit works with items with nato clamp, magic arm 2071/2072/2133, such as SmallRig monitor mount with nato clamp 2100, nato clamp 1973, for quick attachment and release.
5. Elgato #ad
Black 10AAG9901, Elgato Solid Arm Auxiliary Holding Arm for Cameras, Lights and More, Multi Mount Accessory #adElgato #ad
- Durable: Steel and hard composite. Premium finish: High-quality black powder coating. Custom built: works with the Elgato multi mount modular rigging system. Mount more: Attach extra gear to master mount. Versatile: ball head with 1/4-inch screw.
|Warranty||2 year manufacturer|
6. NICEYRIG #ad
314, NICEYRIG Ballhead Articulating Magic Arm with NATO Clamp Quick Release for Gimbal Stabilizer Monitor LED Light #adNICEYRIG #ad
- Securely lock with anti-off structure technology at both ends prevent the ball from falling off. Constructed from high quality aluminum alloy, sturdy to last long. Articulating ball heads can be rotated 360 degree to shoot at any angle.
With 1/4'' thread, flash light for gimbal stabilizer, camera, it allows to mount monitor, camcorder rig system. And features a big wingnut to lock the double ballhead. 3. 3 kg load capacity. Nato lock clamp magic arm saves your time by attaching and detaching quickly.
7. SMALLRIG #ad
SMALLRIG Adjustable Camera Monitor Mount with NATO Clamp for DJI RS 2 / RSC 2-3026 #adSMALLRIG #ad
- For dji rs 2/rsc 2smallrig monitor mount 3026 is specially designed for dji rs 2/rSC 2 gimbal. High customizationmatte surface perfectly matches with the industrial design of stabilizer. Please note: the max payload is 1.
5kg. On top and bottom of it, microphone, light, and one 1/4 threaded hole on side of it, etc. Multiple mounting optionsthere are two 1/4"-20 threaded holes on top of the monitor mount, there is one cold shoe mount which can be attached with a sound receiver, which can be attached with Magic Arm 2163 for action camera or other rigs.
165° tilt rangesmallrig 3026 is adjustable for 165° and can be stopped at any angle without tools. This mount is designed for adding accessories on both sides of the stabilizer, sound receiver, action camera, wireless device, light, such as monitor, etc.
Firm lockingthe monitor mount can be installed on two sides of the stabilizer by quick release NATO clamp and features an anti-removal stud to protect your devices from falling. With its compact structure and consistent design to match RS 2, it is a perfect match with the stabilizer.
8. SMALLRIG #ad
SmallRig Clamp w/ 1/4" and 3/8" Thread and 9.5 Inches Adjustable Friction Power Articulating Magic Arm with 1/4" Thread Screw for LCD Monitor/LED Lights, KBUM2732 #adSMALLRIG #ad
- With 1/4" thread on both ends to install any on-camera flash lights, nato rail 1973, microphone on one end and other accesorries like cage, LCD monitor, microphone, DV Monitor, 15mm Rod 1182 and Quick Release Rod Clamp 1976 etc.
360°rotationdouble 360 degrees ball head articulating design adjusts any angles based on your needs. What you can getmade of aluminum alloy and stainless steel, sturdy and durable. Versatilitysmallrig 2732 comes with a super clamp with 1/4" and 3/8" threads and an articulating arm with 1/4” screws on both ends respectively.
Super clampthis super cool clamp was made of lightweight aluminum alloy, umbrellas, plate glass, shelves, hooks, lights, comes with 1/4"-20 and 3/8"-16 thread and can be mounted virtually anywhere, cross bars, such as cameras, even other Super Clamps.
Package includes: a Super Clamp and a Articulating Magic Arm. Rubber cushionboth the super clamp and the articulating Magic Arm features a rubber cushion which could prevent the scratches of monitor and help to lock your accessories tighter. It can open maximum 54mm and minimum 15mm.
9. Nitze #ad
PA28M-AK, Nitze Lil Stinger Handle Universal Mini Handle Grip with Built-in QR NATO Clamp #adNitze #ad
- Dynamic design, arbitrarily adjust the monitor angle which you want. Arri locating holesarri locating holes on the front of the handle can be mounted with Nitze N54-F4 low profile monitor holder. Ergonomic designall aluminum alloy material, Nitze nato clamp top handle is ergonomically designed to provide you with a more comfortable experience during long-time shooting.
Cold shoe adaptermini camera top handle grip equipped with a cold shoe adapter which can be attached by two 1/4” screws.
The monitor holder mount supports 180° tilt and 360° swivel with free stop. No slip, no sharp edges. Built-in qr nato clampnitze mini top handle grip built-in QR NATO clamp on the bottom of the handle can be quickly attached and detached by the quick release lever.
You can mount it in different locations on the handle for flexibility. Multiple mounting pointsnitze nato rail top handle pa28m-ak is filled with 1/4”-20 threaded holes and ARRI locating holes all around the handle for additional attachment options and DIY operations, and connect a variety of accessories for expansion.
10. SMALLRIG #ad
1138, SMALLRIG Cool Ballhead Arm Super Clamp Mount Multi-Function Double Ball Adapter with Bottom Clamp for Ronin-M, Ronin MX, Freefly MOVI #adSMALLRIG #ad
- Smallrig multi-function double ballhead 1138 is a multifunctional double ball head with a clamp at the bottom and a 1/4" screw on the top. The best load < 1. 5kg. The rod clamp fits for dji ronin & freefly MOVI Pro & all 30mm rods and can also be adjusted with ease.
It can mount monitor and led lights on the one end via 1/4’’ screw, and it can lock the rod on the cage via the clamp tightened by the locking knob. It could be attached and detached from the monitor quickly and the position of the monitor is adjustable as per your needs during shooting.