Top 10 Ninja V Mount – Professional Video Accessories

As an Amazon Associate I earn from qualifying purchases.

1. Atomos


Black, ATOMOS ATOMXMMQR1 Monitor Mount with Quick Release Plate

Atomos #ad - Does not fit shogun7, 付属品:モニターマウント本体 シューアダプター マイナスネジ回し 六角レンチ. Compatibility: atomos shinobi, accessories: Monitor mount, shoe adapter, flathead screwdriver, Atomos Flame & Inferno Series Monitors, Ninja V, hex wrench. Does not fit shogun7, atomos mount - screwdriver Tool - Hex Key - Atomos 1 Year Warranty. Accessories: monitor mount, shoe adapter, flathead screwdriver, hex wrench. Shogun7は非対応, 180° lutning och 360° rotation.
BrandAtomos #ad
ManufacturerATOMOS #ad
Height1.57 Inches
Length2.36 Inches
Weight0.25 Pounds
Width1.97 Inches



ANDYCINE Monitor Cage with Sunhood for Atomos Ninja V/Ninja V+,Atomos Shinobi,Built-in NATO Rails and HDMI Cable Clamp

ANDYCINE #ad - Built in hdmi cable clamp●. The whole cage protect your monitor from bump and scratch. Light weight and protecting your monitors● the cage made of aluminum. Attaching the clamp by two m3 screws. Designed for atomos shinobi /ninja v/ninja v+● andycine monitor cage designed for atomos ninjav and atomos shinobi 5inch Monitors.

With multiple threaded holes on around the cage. Also there are quick release knob to lock and release the clamp. Protecting your monitors and locking the hdmi cable avoid the signal interruption****NINJA V User Attention**** The Red locker on HDMI Clamp should in front of the ninja v screens. There are 1/4inch-20, 3/8inch-16 on the top and downs as well as the both sides.

The cage doe not block any button and port on the monitors. The thread holes reduced the weight and extend the applications on the cage. Withoseut any interruption on the monitor u. Provide you the great experience on the strong light environment. Detachable sunhood●with the help of 4 tapes can easily attach the foldable sunhood on the cage. There is a hdmi clamp on the left side. Only in 6.
ManufacturerANDYCINE #ad
Height1.18 Inches
Length7.09 Inches
Width4.33 Inches
Part NumberA-SHINOBI



360° Swivel and 180° Tilt Monitor Holder Anti-Twist Support 5” and 7” Field Monitor- 2903B, SmallRig Adjustable Camera Monitor Mount for ARRI-Style Upgrade

SMALLRIG #ad - Dual anti-twist design: the camera monitor holder bulid in bouncy locating pins on the top to futher secure Ninja V/ V+, and silicone pad to prevent the monitor from scratching and twisting.

For 5” and 7” monitor: smallrig adjustable monitor mount is designed to support 5” and 7” camera monitors via screw mount for ARRI on the top of camera cage or other mounting system. Quickly tightened: the mount can tilt 180 degree and and swivel 360 degree, different with the old mode 2903 using Allen Wrench, this upgrade monitor 2903B is quickly tightened via a knob to suit different angle. High quality: made of cnc-machined aluminum alloy and stainless steel, sturdy enough to support and protect 5’’ and 7’’ filed monitor, different tilt angle has different load capcaity, 90 degree
ManufacturerSmallRig #ad
Height1.34 Inches
Length1.65 Inches
Weight0 Pounds
Width1.61 Inches
Part Number2903-CF-FBA-US



SMALLRIG Adjustable Camera Monitor Mount with NATO Clamp for DJI RS 2 / RSC 2 / RS 3 / RS 3 Pro, 3026

SMALLRIG #ad - Please note: the max payload is 1. 5kg. 165° tilt rangesmallrig 3026 is adjustable for 165° and can be stopped at any angle without tools. On top and bottom of it, light, etc. With its compact structure and consistent design fits for DJI RS 2 / RS 3 / RSC 2 / RS 3 Pro, it is a perfect match with the stabilizer.

High customizationmatte surface perfectly matches with the industrial design of stabilizer. For dji rs 2 / rsc 2 / rs 3 / rs 3 prosmallrig monitor mount 3026 is specially designed for dji rs 2 / rsc 2 / rs 3 / RS 3 Pro gimbal. This mount is designed for adding accessories on both sides of the stabilizer, such as monitor, sound receiver, light, action camera, wireless device, etc. Multiple mounting optionsthere are two 1/4"-20 threaded holes on top of the monitor mount, there is one cold shoe mount which can be attached with a sound receiver, and one 1/4 threaded hole on side of it, microphone, which can be attached with Magic Arm 2163 for action camera or other rigs.

Firm lockingthe monitor mount can be installed on two sides of the stabilizer by quick release NATO clamp and features an anti-removal stud to protect your devices from falling.
ManufacturerSMALLRIG #ad
Height2.07 Inches
Length5.28 Inches
Weight0.22 Pounds
Width1.65 Inches
Part Number3026-SR



2905B, SmallRig Swivel and Tilt Monitor Mount Adjustable Monitor Holder with Bouncy Locating Pins and Cold Shoe Mount for 5" and 7" Monitors

SMALLRIG #ad - It features 1/4"-20 screw on the top for monitor, light, or microphone and 1/4"-20 threaded hole at the bottom for magic arm. Add bouncy locating pin the mount has protective bouncy locating pins and rubber padding on top, which can increase the friction and protects the monitor from scratching.

For 5" or 7" monitorsmallrig swivel and tilt adjustable monitor mount 2905b is designed to hold your monitor onto the top of the camera or other mounting system via cold shoe adapter. Knob designits tilt axis is quickly tightened via a knob to suit different weight and features tested durability. When using ninja v/ v+ for Atomos, bouncy locating pin can effectively prevent twist. For the safety, 90° load capacity<4.

2kg; 45° tilt load capacity<2. 5kg, please do use the allen Wrench to re-tighten the 1/4'' knurled screw for further security. Wide compatibility: features cold shoe adapter at the bottom to connect camera cage, 1/4"-20 threaded hole for magic arm or stabilizer. The tightness of each axis is adjustable via the allen wrench. 1/4"-20 screw on the top support monitor, microphone, light, etc. Note: different tilt angle has different load capcaity, 30° tilt load capacity<2.
ManufacturerSMALLRIG #ad
Height1.18 Inches
Length1.65 Inches
Weight0.17 Pounds
Width1.87 Inches
Part Number2905-TY



Lights, Audio Recorders, 2070, SMALLRIG Articulating Magic Arm with Double Ballheads 1/4" Screw Monitor Mount for Field Monitor

SMALLRIG #ad - The monitor mounted on it could be adjusted in different positions and angles via both the ballhead and ballhead clamp, and a single wingnut is applied to lock the double ballhead tight directly with single hand. 360 degree adjustablethis smallrig monitor mounted on it could be adjusted in different positions and angles via both the ballhead and ballhead clamp, and a single wingnut is applied to lock the double ballhead tight directly, and thumb screws on both ends are utilized to lock the devices manually and a spared allen wrench is ready to lock it tighter.

The thumb wingnuts with anti-off structure technology prevents the ballheads fall apart when using, and the rubber cushions to prevent the monitor from scratches.

Arm component is interchangeable, super clampsmallrig 735, hot shoesmallrig 1562, it allows you to connect the other options like NATO ClampSmallRig 1973, and 3/8-16 screw adapterSmallRig 1069. For field monitor with 1/4’’ screws on both ends, this product is compatible with a wide range of camera components such as a monitor, small lights, or sound gear, the aluminum and stainless steel arm has a payload capacity of up to 3.3 lb.
ManufacturerSMALLRIG #ad
Height2.05 Inches
Length5.51 Inches
Weight0.33 Pounds
Width1.02 Inches
Part Number2070-SR



3788, and Sunhood, 1/4”-20 Screw, SmallRig Cage Kit for Atomos Ninja V/Ninja V+, M3 Screw,HDMI Cable Clamp, with NATO Rail, Fully Protect Camera Monitor

SMALLRIG #ad - Original designsmallrig cage kit 3788 is specially designed for Atomos Ninja V/Ninja V+, and this Camera Accessory Kit is designed to provide full protection for monitor and screen. All-round protectionsmallrig 3788 also provides professional hdmi cable clamp to protect interface and prevents disconnection.

Connect more accessoriescage 2209 has a nato rail for magic arm 2071, monitor mount 2385; 1/4"-20 threaded holes support Monitor Mount 2905, magic arm 2070; 3/8" -16 locating holes for arri type allow attaching monitor Mount 2903, Magic Arm 2115. Smallrig warranty serviceour customer representative will get back to you within 24 hours to troubleshoot the reported issue, 30-day No-hassle Return Service, Worry-free 2-year Warranty. The cage kit for atomos from SmallRig provides an ideal production tool for Atomos Ninja V/Ninja V+.

The kit includes cage 2209, scratches, sunhood 2269, water spray, which can block strong sunlight, which is easily applied and protects the monitor screen from fingerprints, dust, embedded with environmentally friendly brass to help dissipate heat and featuring screen protector, Silicone Case Kit 3448, and knocks. Packgge include 1 x cage,1 x cable clamp,2 x 1/4”-20 screw,4 x m3 screw,3 x allen wrench,1 x sunhood,1 x silicon Case,2 x Anti-twist Locating Plate,1 x Screen Protector,1 x Wipe,1 x Tissue,1 x Dust cloth,1 x Dust Absorber.
ManufacturerSMALLRIG #ad
Height0.97 Inches
Length6.97 Inches
Weight0.6 Pounds
Width4.21 Inches
Part Number3788-CF

8. Desview


Desview M3 Field Monitor Mount, Swivel 360°and Tilt 180°Adjustable Camera Monitor Mount Holder with Cold Shoe for 5’’ and 7’’ Camera Monitor

Desview #ad - Premium materialmade of premium aluminum alloy, the mount holder has protective rubber padding on top. Besides, protecting the camera monitor or your devices from scratching, built in anti-slip ring rubber pad design can be protect the hot shoe joint.

Super flexible & adjustableadjustable field monitor holder with the cold shoe adapter can swivel 360 degree and tilt 180 degree, provide a better viewing angle for your monitor. Max load capacityfor best effect, the weight of the support device should be 5 lb or less. The tightness of monitor mount can adjustable via the Allen wrench and red lever. Wide compatibilitycamera monitor mount is designed to hold your monitor onto the top of the camera or other video shooting devices via the cold shoe adapter.

Please do use the Allen Wrench to re-tighten the thumbscrew for further secure. Compatible with atomos shogun Flame, Atomos Ninja Series or most of 5" and 7 "camera monitors. Cold shoe mount & 1/4 screw designwith standard cold shoe & 1/4 screw hole on the top & bottom, recorder, led video light, easily mounted with tripod, flash light, filed monitor, smartphone and any devices with 1/4" Holes or cold shoe adapter.
BrandDesview #ad
ManufacturerDesview #ad
Height1.38 Inches
Length2.56 Inches
Weight0.18 Pounds
Width2.56 Inches
WarrantyManufacture warranty for 90 days from date of purchase

9. Sanpyl


Aluminum Alloy Camera Monitor Mount Holder, Sanpyl U Shape Expansion Bracket, for Atomos Ninja V Monitor, with for Arri Positioning Holes

Sanpyl #ad - Mounting screw holes: designed with 1/4 inch with for Arri positioning holes and 3/8 inch with for Arri positioning holes, a total of 8 1/4 inch screw holes and 3 3/8 inch screw holes.

Aluminum alloy material: made of high quality aluminum alloy material, sturdy and durable, CNC process, anti corrosion. Easy to install: u shape bracket for Atomos Ninja V monitor will not affect the use of battery and hard disk after installation. Good workmanship: exquisite workmanship, small and portable, beautiful appearance, providing you great using experience. Compatible with the installation of various types of equipment. Scope of application: expansion bracket is specially designed for Atomos Ninja V monitors.
BrandSanpyl #ad
ManufacturerSanpyl #ad
Part NumberSanpylumeq8gnt7f8326



Ninja Inferno, ANDYCINE Lunchbox Red Magnalium Case for DIY SSD Compatible for Sumsung 860/870 1TB/2TB Compatible with Atomos Ninja V,V+, Ninja Flame, and Shogun Inferno

ANDYCINE #ad - Cost effective way and save money on a USB-C portable SSD to alternate the expensive Atoms X SSD. The compatible ssd is sumsung 860/870 series ssd diy case for make the ssd card as the replacement of the Atoms X SSD.

Special designed case for ninja v recorders. Please follow the instruction step on detach the msata ssd and assemble the case. Please handle it carefully when detach the mSATA from the SSD housing, we do not take any duty on the damage on your SSD. The red diy metal case works properly with ninja v, and shogun inferno. But not work with shogun studio, v+, ninja Inferno, Sumo 19, Ninja Flame, and Sumo 19M. You can turn the msata ssd as the ssd for atoms NINJA with the help of the case and adapters(Include). Say goodbye to uSB-C to SSD cords adapters.
ManufacturerANDYCINE #ad
Part NumberANC R002
Warranty1 Year