As an Amazon Associate I earn from qualifying purchases.
1. NICEYRIG #ad
NICEYRIG Quick Release Clamp for Arca-Swiss Standard, QR Base for Zhiyun Crane Series/Weebill S/DJI Ronin S Gimbal and Camera Tripod, 384 #adNICEYRIG #ad
- Also the arca base plate comes with scale for recording camera's position and making adjustment. Quick switch between arca-type standard gimbal and tripod, that makes it easier without needing to replace the plate on the bottom of your camera.
Built-in dovetail on the bottom to raise gimbal. Could mount on gimbal plate in vertical or horizontal direction for the purpose of keeping camera balance. Features 1/4''-20 and 3/8''-16 threaded holes for attaching corresponding accessories, like wooden handle. Universal for gimbal stabilizers and Arca tripod. Lock quickly via M5 knurled knob.
2. Haoge #ad
WEEBILL LAB Handheld Gimbal Stabilizer, Crane 3 LAB, WEEBILL-S, Haoge HQR-ZY120 120mm Camera Mounting Quick Release Plate for ZHIYUN Zhiyun Crane 2 #adHaoge #ad
- High quality aluminum alloy is used to ensure a light weight but super high strength support. Aluminum alloy, CNC precision machining, surface oxidation treatment. It allowing for easy nodal point adjustments.
The haoge hqr-zy120 camera plate is specifically designed for zhiyun crane 2, weEBILL-S, CRANE 3 LAB, WEEBILL LAB Gimbal Stabilizer. A laser-engraved reference scale with 1mm increments on both sides.
3. UURig #ad
Upgrade Claw Quick Release Plate Camera Mount w Arca Swiss Slot, DSLR Stabilizer Adapter Compatible with Sony/Nikon/Canon Cameras Zhiyun/DJI/Moza Gimbal/Slider/Tripod Plate 1/4" Screw Video Shooting #adUURig #ad
- From a tripod to a slider/monopod/selfie stick/backpack/chest strap/belt/helmet/gimbal stabilizer or any set up in seconds instead of screwing and unscrewing. Secure and Safe; rubber pad, anti-skip design. Compact size with large load-bearing - only 59g weight, can bear up to 50KG.
It would save lots of time while switching between cameras. Super easy-use claw system - quick release system allows quick change from one camera/action cam setup to another. Also you can use with action camera if you have 1/4" adapter, then it would be compatible with GoPro Hero 9 8 7 6 5 Series /INSTA360 One R / DJI OSMO Action etc.
Suggested to mobile use within 10KG. Two screws can also be connected to the stabilizer, make your device more stable and no shaking.
Safe slide lock - avoid accidental touch to cause damage to your camera equipment. Second generation claw arca swiss camera quick release plate - it is more convenient to connect the arca swiss tripod plate and camera stabilizer slider rail etc. Can be used for all claw series Quick Installations, Realizing Fast Switching Back and Forth. More 1/4 screw holes, more options - more 1/4 screw holes are added at the bottom to provide more connection.
4. ANDYCINE #ad
ANDYCINE Quick Release Plate with 1/4inch Thread Holes 38mm Universal Arca Groove Compatible for DJI Ronin-S/RS2/RSC2 Zhiyun Weebill S Crane 2/3 Gimbals and Tripod/Monopod #adANDYCINE #ad
- Wide compatibilitythe quick-release plate adopts the original camera plate design, it has a gear rack at the bottom specially for DJI Ronin RS2, and is compatible with the original standard Arca-Swiss plate, allowing the quick-release plate for a slight adjustment. Anti-drop pin designthe quick release plate has and anti-drop design which can secure locking and anti-drop functions when matched into the original arca plate.
The overall weight is only 110 grams, the length of the inner slide is 57mm, which is convenient to carry and use. More stabilizer/gimbals support ****zhiyun weebill user attention*** please tight the screw on your gimbal which hold the palte first-in case of loosen.
Andycine aluminum alloy qr plate with arca-type is special designed for DJI RoninS/RS2/RSC2 Stabilizer, ZHIYUN Weebill S, Crane 2/3. Fast lock and release this quick release plate enable with 38mm arca-Swiss Standard Groove can be quick attach and dis-attach to the selected gimbals by thumb screw without any tools.
Great and helpful tool to install the L bracket, cage and monitors on the gimbal whichi can swift quickly between tripod and gimbals. The size is 130x50x16 mm, and the bottom surface has 6 Standard 1/4 thread holes. Support the tripod and momopod which enable the 1/4inch screw or which can hold the 38mm Arca Swiss Groove. Brilliant design the frosted surface treatment avoids reflections and adds a non-slip design.
5. zhi yun #ad
Zhiyun TransMount Quick Release Base Plate Compatible with Zhiyun Crane 2S/ Crane 2/Crane 3/Crane 3S/WEEBILL S/WEEBILL LAB #adzhi yun #ad
- Anti-dropping Protection Design. Arca swiss & manfrotto Standard Dual Plates. Latch and lock onto Gimbal Bag or Camera Belt. Quick setup and Release system.
|Brand||zhi yun #ad|
|Manufacturer||zhi yun #ad|
|Model||Zhiyun WEEBILL LAB|
6. ULANZI #ad
Crane 3 Lab, Support The Crane 2S Lens Support Frame, FALCAM F38 Camera Quick Release System with 38mm Arca-Type Anti-Deflection QR Plate for Zhiyun Weebill 2, Weebill-S, Crane 2S, Weebill Lab #adULANZI #ad
- Anti-deflection designto prevent camera's deflection during multi-angle shooting, we specially designed a 3-mode quick release plate to ensure the stability of different cameras during shooting. Unique safe lockf38 quick release plate designed with safe lock to avoid mis-touch.
For zhiyun seriesspecially designed for zhiyun weebill 2, weebill-s, crane 2S, this quick release system aims to assist users to directly install a camera on the gimbal.
Switch quickly between tripods and gimbal, Weebill Lab gimbal stabilizer, Crane 3 Lab, thereby saving time and improving the efficiency. Just one touch to switch between Deadlock Mode and Press Mode. A push to install, a press to remove, incredibly fast.
Premium craftsmanshipcrafted of aluminum alloy and stainless steel, and finished by CNC machining, framed with solid mortise and tenon structure, F38 quick release kit boasts premium quality. Secure and stable. Ultra quick releasef38 series quick release kit, cleverly blend the ancient Chinese mortise and tenon with modern mechanical structure. Max vertical load: 80kg/176lb.
7. zhi yun #ad
Zhiyun L-Shaped Quick Release Plate for Crane M2 Handheld Gimbal Stabilizer Sopport Mirrorless Cameras Smartphone Action Cameras Vertical Photography #adzhi yun #ad
- Sopport vertical shooting for your Mirrorless Cameras, Smartphone and Action Cameras. You can quickly mount or dismount your camera with a single press of the lock button. Special vertical design for Zhiyun Crane M2 3-Axis Handheld Gimbal Stabilizer.
With a unique scale mark and memory lock, balancing can be easily finished and preserved, once and forever, saving much trouble of readjustment every time. Crane-m2 is designed with a whole new quick release system - Lite.
|Brand||zhi yun #ad|
|Manufacturer||zhi yun #ad|
|Part Number||L-Shaped Quick Release Plate|
|Model||L-Shaped Quick Release Plate|
8. Acouto #ad
Acouto Camera Riser Plate 1/4" Screw Camera Height Riser Camera Stabilizer Quick Release Base 1.5cm Height Riser Adapter for Zhiyun Crane for DJI Ronin-S DSLR Stabilizer #adAcouto #ad
- When using dslr stabilizers, like Zhiyun or Dji, this heighten pad can be mounted between the quick plate and camera. Increase height by 1. 5cm, avoid the touch between camera lens and the quick plate.
Specifications are 1/4'' screw holes and screw thread. No coins or wrenches needed, very easy to install. The adaptor block of quick mounting plate, made of high quality aluminum alloy.
9. Zhiyun #ad
Crane 3S and Crane 2, Zhiyun TransMount Quick-Release Base Plate for Weebill S, Weebill LAB #adZhiyun #ad
- Use for: zhiyun weebill s, weebill LAB, Crane 3S and Crane 2. In the box: transmount Quick Release Base Plate x1. Original oem zhIYUN Accessories.
10. Akozon #ad
Camera Quick Release Plate Profession Gimbal Increase Pad Riser Base Quick Release Plate for Zhiyun Weebill Lab S Crane 2 Crane 3 for weebill Riser #adAkozon #ad
- As a heightening padthe height increase pad can be installed between the fast board and the camera, the height is increased by 06 inches, it will bring you a different photography experience. The surface has a protective soft pad to protect your precious camera when using it.
Very versatileits screw hole size is 1/4, which is extremely versatile and suitable for any camera with a 1/4 screw hole. Durable materialthis quick mounting plate adapter is made of high-quality CNC aluminum alloy, with long service life and light weight.
Protect the cameraafter using the quick release plate, the contact between the camera lens and the quick plate can be avoided.
This is the perfect accessory for photographers. For weebill riser. With dovetail bayonetthe small focus pad of the camera has a size of 50 x 36 x 15mm with a dovetail bayonet at the bottom, which is easy to install and remove. Durable materialthis quick mounting plate adapter is made of high-quality CNC aluminum alloy, with long service life and light weight.