Top 8 Logic Level Converter – Audio & Video Accessories

As an Amazon Associate I earn from qualifying purchases.

1. KeeYees

#ad

KeeYees 10pcs 4 Channels IIC I2C Logic Level Converter Bi-Directional Module 3.3V to 5V Shifter for Arduino Pack of 10

#ad
KeeYees #ad - This level converter works with 2. 8v and 1. 8v devices, it can bidirectionally transfer with 4 channels between high logic voltage and low logic voltage. Each logic level converter has the capability of converting 4 pins on the high side to 4 pins on the low side with two inputs and two outputs provided for each side. The bi-directional logic level converter is a small device, which can safely steps down 5V signals to 3. 3v and steps up 3. 3v to 5v at the same time.
BrandKeeYees #ad
ManufacturerKeeYees #ad
Part NumberKYES505-10

2. Anmbest

#ad

Anmbest 5PCS 4 Chanels High Speed Bi-Directional 3.3V-5V Logic Level Converter for Arduino Raspberry Pi Electronic Development

#ad
Anmbest #ad - Convert different logic levels:this logic level converter features four high speed bi-directional 4 channels, allowing for safe and easy communication between devices operating at different logic levels. Converting between logic levels as low as 1.

5 v on the lower-voltage side and as high as 18 V on the higher-voltage side. Universal compatibility: Module compatible breadboard, can be directly inserted in the breadboard to use. Spi or asynchronous TTL serial. Fast conversion: the logic high levels on each side of the shifter are achieved by 10 kΩ pull-up resistors to their respective supplies; these provide quick enough rise times to allow decent conversion of fast mode 400 kHz I²C signals or other similarly fast digital interfaces e.

G. Suitable for multiple interfaces: its four channels are enough to support most common bidirectional and unidirectional digital interfaces, including I²C, SPI, and asynchronous TTL serial. External pull-ups can be added to speed up the rise time further at the expense of higher current draw. Attention:this module comes with male header pins that require soldering. B>.
BrandAnmbest #ad
ManufacturerAnmbest #ad
Part NumberAnmbest_MD33
ModelNA

3. XCSOURCE

#ad

XCSOURCE 5PCS IIC I2C Logic Level Converter Bi-Directional Module 5V to 3.3V TE291

#ad
XCSOURCE #ad - The level converter is very easy to use. This level converter works with 2. 8v and 1. 8v devices. The board needs to be powered from the two voltages sources high voltage and low voltage that your system is using. Brand new and High Quality.
BrandXCSOURCE #ad
ManufacturerXCSOURCE #ad
Part NumberTE291
ModelTE291

4. FTCBlock

#ad

FTCBlock 10Pcs 3.3V-5V 4 Channels Logic Level Converter Bi-Directional Shifter Module for Arduino CYT1076

#ad
FTCBlock #ad - It can bidirectionally transfer with 4 channels between high logic voltage and low logic voltage. The module is compatible with breadboards and can be inserted directly onto the breadboard. Small size:1. 3× 1. 5cm/ 051× 059in. The bi-directional logic level converter is a small device that safely steps down 5V signals to 3. 3v and steps up 3. 3v to 5v at the same time. Each logic level converter has the capability of converting 4 pins on the high side to 4 pins on the low side with two inputs and two outputs provided for each side.
BrandFTCBlock #ad
ManufacturerSouthern Tech #ad
Part NumberCYT1076

5. DOAMYLER

#ad

TXS0108E 8 Channel 8 Bit Logic Level Converter Bi-Directional High-Speed Full Duplex Shifter 3.3V 5V for Arduino Raspberry Pi 5pcs

#ad
DOAMYLER #ad - Serial communication interface is compatible with UART/IIC/SPI port. Provide 3. 3-5v, 1. 8-3. 3v and other common level conversion capabilities. Vcca terminal supports voltage range: 1. 2v-3. 6v; vccb terminal supports voltage range: 1. 65-5. 5v. It can also apply in the level conversion between MCU and SD card, MCU and IIC/SPI serial port devices. Provide two-way communication capability: It can bidirectionally transfer with 8 channels between high logic voltage and low logic voltage. Widely used in the communication between 5v scm and 3. 3v device, 3. 3v scm and 5V device.
BrandDOAMYLER #ad
ManufacturerDOAMYLER #ad
Part Number1
Model1

6. Satisfy Electronics

#ad

1pcs IIC I2C Logic Level Converter Bi-Directional Module 5V to 3.3V For Arduino

#ad
Satisfy Electronics #ad - Dimensions:063 x 052" 16. 05 x 13. 33mm. The level converter is very easy to use. High voltage 5v for example to the hv' pin, low voltage 3. 3v for example to lv', and ground from the system to the GND' pin. The board needs to be powered from the two voltages sources high voltage and low voltage that your system is using.
BrandSatisfy Electronics #ad
Manufacturersatisfyelectronics #ad
Part Number4330118017
Model4330118017

7. Ziekk

#ad

Ziekk 3.3V 5V TXS0108E 8 Channel Logic Level Converter Module Bi-Directional High Speed Full Duplex Shifter for Arduino Raspberry Pi 5PCS

#ad
Ziekk #ad - You can provide other common 3. 3-5v 1. 8-3. 3v level conversion capability. Txs0108e 8-way high-speed full-duplex level conversion module. Vccb side support voltage 1. 65v-5. 5v. Rovide two-way communication capability. Vcca terminal voltage of 1. 2v-3. 6v support.
BrandZiekk #ad
ManufacturerZIEKK #ad
Height0.2 Inches
Length1.04 Inches
Weight0.03 Pounds
Width0.62 Inches
Part NumberZIEKK-TXS0108E
ModelTXS0108E

8. Luckkyme

#ad

Luckkyme 10PCS 4 Channels IIC I2C Logic Level Converter Bi-Directional Shifter Module 3.3V to 5V for Arduino

#ad
Luckkyme #ad - Each level converter has the capability of converting 4 pins on the high side to 4 pins on the low side with two inputs and two outputs provided for each side. Small module size: 1. 3cm x 1. 5cm/051"x059". Compatible with breadboard, can be directly use in breadboard. Logic level shifter Bi-Directional with 4 channels between high logic voltage and low logic voltage. This 4 channels bi-directional logic level converter is a small device that safely steps down 5V signals to 3. 3v and steps up 3. 3v to 5v at the same time.
BrandLuckkyme #ad
ManufacturerLuckkyme #ad
Part Number021
Model8541586311