Top 9 NPT Female Coupler – Kitchen & Dining Features

As an Amazon Associate I earn from qualifying purchases.

1. Banjo Corp


2" Female Coupler x NPT Female, Banjo 200D Polypropylene Cam & Groove Fitting

Banjo Corp #ad - Cam-locking female coupler for connecting two pipes or hoses. Maximum operating pressure of 125 psi. Female cam coupler on one end for connecting to a male adapter and female NPT threads on the other for connecting to a male NPT connection. Meets military standard MS27019 for quality assurance. Polypropylene for resistance to most chemicals, dimensional stability, and sterilizable.
BrandBanjo Corp #ad
ManufacturerBanjo Corporation #ad
Height3 Inches
Length6 Inches
Width4 Inches
Part Number200D

2. Ferroday


FERRODAY Stainless Steel Quick Disconnect Set 1/2 NPT Female Disconnect 1/2" Barb Brewing Quick Disconnect For Wort Pumps for Wort Chiller Connectors for Ball Valve Hose Fitting & O-rings

Ferroday #ad - The fpt quick disconnect works perfect for homebrew quick disconnect setup. Push-on hose fittings firstly you need to pull up the collar on the barbed quick disconnect, then put the Female fitting into the barbed quick disconnect, and then release the collar to lock.

Connection easilythis quick disconnect set allows one hand operation of take on/ take off. It will create a tight seal for liquid & gas between FPT fitting and the barbed quick disconnect. Our female quick disconnect is anti-corrosion/ heat-resistant and wear-resistant. The 1/2" od barbed hose fittings is great for attaching 1/2" ID hose.

304 stainless steel the fpt quick disconnect is made of top quality 304SS that will last a lifetime. No leaksthe barbed quick disconnect has a red silicone gasket inside. Quickly switch lines between equipment 1/2 npt thread quick disconnect can attach to any 1/2 male thread fitting(ball valve, wort chillers, beer pump. The internal o-ring is food grade silicone. All parts fit together very well.
BrandFerroday #ad
ManufacturerFERRODAY #ad
Weight0.1 Pounds
Part NumberFE-2-BBF

3. SharkBite


Copper, U088LFA, HDPE, SharkBite 3/4 x 3/4 Inch FNPT Adapter, PEX Pipe, CPVC, PE-RT, Push To Connect Brass Plumbing Fitting

SharkBite #ad - Easy to install: the innovative push-to-connect design of the SharkBite push female adapters allows for quick and easy installation, glue, crimping, with no tools, or soldering required; can be installed in wet lines.

Specs: made with dzr forged brass, this female adapter can withstand 200 degrees F and 200 PSI. Preferred by the pro: sharkbite tools and fittings meet the same high standards for commercial and residential plumbing applications, combining durability and ease of use suitable for underground and behind-the-wall applications with no access panels. Versatile: pushfit female connectors work well with pex, sdr-9 hdpe, cPVC, PE-RT, and copper pipes; large diameter fittings 1-1/4 inches to 2 inches require a Stiffener when connecting to PEX pipe.

Sharkbite brass push female adapter: this push-to-connect fitting allows you to make a transition between a pipe and an MNPT thread quickly and easily; ideal for working in tight spaces; remove using a disconnect clip or disconnect tongs.
BrandSharkBite #ad
ManufacturerCash Acme #ad
Height6.25 Inches
Length10.75 Inches
Weight0 pounds
Width4 Inches
Part NumberU088LFA



LASCO 17-5847 1/2-Inch Female Flare by 3/8-Inch Male Flare Brass Adapter

LASCO #ad - Not for use in potable drinking water applications. Female flare by male flare adapter. Used for fuel, air, oil, liquid petroleum LP and natural gas lines connections. Brass material lasts long. 1/2-inch female flare by 3/8-Inch male flare.
BrandLASCO #ad
ManufacturerLASCO #ad
Height1 Inches
Length1.5 Inches
Weight0.12 Pounds
Width1 Inches
Part Number17-5847

5. Tool Daily


Tool Daily Pressure Washer Coupler, 1/4 Inch Quick Connect

Tool Daily #ad - Fit most pressure washer equipment. 1/4" npt 6. 35mm brass socket quick coupler and female thread fitting. Ball lock design makes sure a solid connection each time. Ideal for quick exchange of guns and nozzles. It used in a lot of situations where high pressure connections are frequently assembled or disassembled. Working pressure is rated to 5, 000 PSI.
BrandTool Daily #ad
ManufacturerTool Daily #ad
Height1.57 Inches
Length6.3 Inches
Weight0.25 pounds
Width2.36 Inches
Part NumberPD-31886

6. Orbit


Orbit 53368 1/2" Slip x 3/4" FHT Fitting Hose-to-Pipe Fitting

Orbit #ad - Use pipe thread tape on male pipe threads to ensure leak-free connections. Compatible with fittings from Orbit, Hydro-Rain, and other major brands. Brass or plastic construction stands up to the elements and ensures long life. For connecting hose fittings to an irrigation system or irrigation components to the end of a hose.
BrandOrbit #ad
ManufacturerOrbit #ad
Height1.38 Inches
Length2 Inches
Weight0 pounds
Width1.38 Inches
Part Number53368



2Sets 1/4" Brass Quick Disconnect Coupler Carpet Cleaning Extractor Wands & Hose

TEAMWILL #ad - Thread: 1/4" female npt, FPT. Package included:4pcs Quick Disconnect Coupler. Material: brass, Double O-ring Seal. 1/4" male quick disconnect brass w/ stainless steel poppet coupler. 1/4" female quick disconnect brass w/ stainless steel poppet coupler.
ManufacturerTEAMWILL #ad
Part Number14VALVE2PC2

8. Banjo Corp


Banjo 200A Polypropylene Cam & Groove Fitting, 2" Male Adapter x NPT Female

Banjo Corp #ad - Price for: each standards: ms27019 gasket material: epdm coupling type: a body material: polypropylene item: adapter Fittings Sub-Category: Adapters Connection Type: Male Adapter x FNPT Pipe Size: 2" Coupler Size: 2" Max. Pressure: 125 psi country of Origin subject to change: United States.
BrandBanjo Corp #ad
ManufacturerBanjo Corporation #ad
Height4 Inches
Length5 Inches
Width3 Inches
Part Number200A

9. Double4U


Stainless Steel Female Quick Disconnect MPT 1/2"

Double4U #ad - Be widely used in connection to Plate Wort Chillers, Wort Pumps, Mash-tun, Kettle Stock Pot etc. Female qd with 1/2" male NPT on the end for easy connectivity. Food grade stainless steel 304 material. Silicon o ring inside for leak-free connections and temperature range is -40° to 250° F. Lifelong use for brewing applications.
BrandDouble4U #ad
Weight0.24 Pounds